8
Safety Precautions
Precautions for use
Controller and Module
ˎ
ˎ
Do not disassemble
ˎ
ˎ
Do not modify the product (Modification may destroy the
protection function inside, or cause abnormal charge/
discharge, heat generation, gas eruption, or fire.)
ˎ
ˎ
Refer to “Connection Method” on Page 16 and follow the
procedure when you connect a cable to the product.
ˎ
ˎ
In the case of a failure, or any of the abnormalities shown
below, turn off the set and contact Sony customer services.
ˎ
ˋ
Abnormal sound, smell or smoke
ˎ
ˋ
Water or particles inside the product
ˎ
ˋ
The product is dropped or the cabinet is damaged
ˎ
ˎ
Do not touch the rear output terminal except for
installation.
ˎ
ˎ
Do not throw the product into fire or heat, or otherwise
expose the set to heat or naked flame.
ˎ
ˎ
Do not submerge the product in liquid, or allow it to
become wet.
ˎ
ˎ
Do not apply strong shock, crush, or drop.
ˎ
ˎ
Do not use for medical purposes.
ˎ
ˎ
Do not place any foreign objects inside.
ˎ
ˎ
Do not connect any devices that exceed the operating
voltage and current range.
Energy Storage Module
ˎ
ˎ
Charge and discharge the product according to the
control signals of the controller.
ˎ
ˎ
Do not hammer a nail or punch a hole in the product.
ˎ
ˎ
Do not unplug the power connector from the POWER
CONNECTOR terminal while power is turned on.
ˎ
ˎ
Replace the module with a new one if discharge time at
room temperature is noticeably short, even from fully
charged.
Description .of .the .controller
Module .description
