Sony IJ1001C Скачать руководство пользователя страница 7

7

Safety Precautions

No .wet

Do not touch with wet hands

If you touch the set with wet hands, it may 
cause electric shock.

Instruction

Install other equipment or accessories 

properly

If you inadequately install other equipment or 
accessories sold separately they may fall and 
cause injury. When you install any of the 
following accessories, install it properly based 
on this manual.

ˎ

ˎ

Bracket

ˎ

ˎ

Power connector

Instruction

Set up cables properly

If your foot is caught by a cable, the set may 
fall and cause injury.
Connect and install cables carefully.

Instruction

Power off at a malfunction

In case any malfunction happens, please turn 
off the POWER ON/OFF switch in order to shut 
down, and remove the power connector from 
the POWER CONNECTOR terminal of the 
module.

Prohibited

Do not put anything, stand or sit on 

the set

If you put anything on the set, it may fall and 
cause injury. Also, if it is used as a stool, for 
example, it may topple and cause injury.

Instruction

Follow related laws or ordinances for 

disposal

When you dispose of this product, do not 
dispose as general or household waste.

Instruction

Disposal with specified method

Contact technical vendor when you discard.
Do not disassemble, destroy, or disposal in the 
fire.

 . Danger

If .liquid .is .leaking .from .the .module, .observe .the .following .

measures .

ˎ

ˎ

Do not allow the liquid to come in contact with skin or 
clothing.

ˎ

ˎ

If the liquid comes in contact with skin or clothing, wash 
thoroughly with plenty of water.

ˎ

ˎ

If the liquid gets into the eyes or mouth, flush immediately 
with clean water, and immediately seek medical treatment.

ˎ

ˎ

Contact customer service.

Содержание IJ1001C

























Отзывы: