12
Part Names and Functions
Display Panel
Press the DISP button to display information on a panel.
Display switching-over flow
Overall
Connection
Status
Mode
Cell Temp
Alarm bits
Heatsink
Status
Mode
Cell Temp
Alarm bits
Turn .on
Module .#00
Module .#N
Display .system’s .overall .status
.: .Press .and .hold .DISP .switch
#N .means .top-level .module
Setting .for .“Comm .Off .Mode”
Display .status .of .each .module
.: .Press .DISP .switch
Tips
ˎ
ˎ
Hold the DISP button more than 3 seconds.
ˎ
ˎ
If you press and hold the DISP button during “Connection” Display, the display panel goes back to “Overall”.
ˎ
ˎ
“Comm Off Mode” is used for maintenance.
Display images
“Overall” .Display
MODE=DIS I=- 10.0A
RSOC= 30% V= 300.0V
Item
Details
Display
MODE
Charge/discharge
and stop status
DIS: discharge
CHG: charge
OFF: stop (Available only when a
resistor (100Ω) is connected
between the GND and SW ON
terminals.)
RSOC
Remaining
System Capacity
0% - 100%
I
Total system
current
-999.9A - +999.9A
V
Total system
voltage
0.0V - 999.9V
“Connection” .Display
UNIT=6 VER=1000
CON=----------oooooo
Item
Details
Display
UNIT
Number of
connected
module
1 - 16
VER
Version
XXXX
CON
Connected
module status
Sample above indicates 6 modules
(#00 - #05) are connected.
