30
Changing the screen
settings
You can adjust the screen settings manually if
the screen is hard to see from your position.
1
Press
TV MENU
.
The “PICTURE” screen appears.
Each time you press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next) [TUNE/CH
–
or
+]
, the setting screen changes in the
following sequence:
TV
DVD
2
Press
ENTER
to adjust to the desired
setting.
PICTURE
: Press
TV CH/,
>
(Next) [TUNE/CH +]
to
increase the contrast. Press
TV
CH/PRESET –,
.
(Previous)
[TUNE/CH –]
to decrease
contrast. Press
ENTER
to enter the
setting. (Default value: 32)
BRIGHTNESS
:
Press
TV CH/,
>
(Next)
[TUNE/CH +]
to brighten the picture.
Press
TV CH/PRESET –,
.
(Previous)
[TUNE/CH –]
to darken the picture.
Press
ENTER
to enter the setting.
(Default value: 30)
COLOR
: Press
TV CH/,
>
(Next)
[TUNE/CH +]
to increase color
saturation. Press
TV CH/PRESET –,
.
(Previous)
[TUNE/CH –]
to decrease
color saturation.
Press
ENTER
to enter
the setting.
(Default value: 32)
HUE
:
Press
TV CH/,
>
(Next)
[TUNE/CH +]
to increase red tones. Press
TV CH/PRESET –,
.
(Previous)
[TUNE/CH –]
to decrease the green tones.
Press
ENTER
to enter the setting.
RESET
: You can reset the PICTURE, BRIGHTNESS,
COLOR and HUE settings to the factory
setting. Press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/
CH –
or
+]
to select “YES.”
Press
ENTER
to enter the setting.
CABLE
: Press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/CH –
or
+]
to
select one of the following options.
ON : Select if you are receiving cable
channels with a CATV cable.
OFF : Select if you are using a TV antenna.
Press
ENTER
to enter the setting.
MTS
:
Press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/CH –
or
+]
to
select one of the following options.
STEREO : Select when viewing a broadcast in
stereo.
MONO : Select to reduce noise in areas of
poor reception.
AUTO SAP : Select to have the TV
automatically switch to a second audio
program(SAP) when a signal is received.
Press
ENTER
to enter the setting.
AUTO PROGRAM
:
Press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/CH –
or
+]
to
select “YES,” then press
ENTER
. The TV
will scan through all available channels
and program receivable channels.
CHANNEL SKIP/ADD:
Select whether a channel is skipped or
displayed when
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/CH
–
or
+]
is pressed.
Select CHANNEL by
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next)
[TUNE/CH –
or
+]
and then press
ENTER
.
When you want to skip the channel, press
TV CH/PRESET –,
.
(Previous)
or
+,
>
(Next) [TUNE/CH –
or
+]
, display
SKIP and then press
ENTER
.
When you want to display the channel,
select ADD in the procedure mentioned
above.
The setting value of
the item selected
appears in this area.
AUX
