Help Guide
How to Use
Troubleshooting
IC recorder operations
Messages
System limitations
List of Topics
IC Recorder
ICD-BX132
Messages list
Follow the instructions below if a message appears on the display.
HOLD
All the button operations are disabled because the IC recorder is in the HOLD
status to prevent unintentional operations. Slide the HOLD
・
POWER ON/OFF switch
towards the center to release the IC recorder from the HOLD status.
(See “
Releasing the HOLD function
.”)
LOW BATT (
flashes at the same time)
You cannot format the memory or erase all the files in a folder because of
insufficient battery power. Replace the old batteries with new ones.
(See “
Inserting batteries
.”)
LOW BATT (
flashes at the same time)
The batteries are exhausted. Replace the old batteries with new ones.
(See “
Inserting batteries
.”)
FULL (
flashes at the same time)
The remaining memory capacity of the IC recorder is insufficient. Erase some files
before recording.
(See “
Erasing a file
.”)
FULL (folder indicator flashes at the same time)
As there are already the maximum number of files in the folder to which you want
to move a file, you cannot move the file. Erase some files before moving.
(See “
Erasing a file
.”)
FILE FULL
When there are already the maximum number of files in the selected folder or the
total number of files stored on the IC recorder has exceeded the maximum, you
cannot record a new file or you cannot divide a file. Erase some files before
recording or dividing.
(See “
Erasing a file
.”)
DATA ERR
You cannot play back or edit files, because the data of the selected file is
damaged.
SET DATE
Set the clock; otherwise, you cannot set the alarm.
NO FILE
The selected folder does not have any files. You cannot move a file or set the
alarm, etc., because of this.
LOCK ( flashes at the same time)
The selected file is protected file. You cannot erase it, add a recording to it, add an
overwritten file to it, or divide it. Cancel the protection on the IC recorder to edit
Back Back to Top
173
