Sony HXR-NX200 Скачать руководство пользователя страница 27

Страница: 27 / 122

Ge
tt

rte

Open the cover, and insert the
memory card with the notched
corner in the direction as illustrated
until it clicks into place.

• If you insert a memory card into the slot in the

wrong direction, the memory card, the memory
card slot, or image data may be damaged.

• Memory card slot A accepts either “Memory

Stick PRO Duo” media or an SD card. Memory
card slot B accepts an SD card only.

To eject a memory card

Lightly push the memory card once.

Notes

• If “The image database file is corrupted. The

media must be restored to use again.” appears,
format the memory card (p. 70).

• When inserting or ejecting the memory card, be

careful of the memory card popping out and
dropping.

Selecting the memory card slot to be
used for recording

Press the SLOT SEL button to change
which slot is selected for recording. You
can confirm the selected slot on the screen.

Notes

• You can only select a slot that already has a

memory card inserted.

• While movies are being recorded on the

memory card, you cannot switch the slot even if
you press the SLOT SEL button.

Tip

• When only one slot has a memory card inserted,

the slot that has the memory card is selected
automatically.

If a repair memory card prompt screen
appears

There may have been a problem recording
to the memory card during the most-recent
recording. Select [OK] to repair the card to
the extent possible. Select [CANCEL] to
continue without repairing.

Notes

• Correct repair may not be possible, even when

repair is executed.

• Repair is not supported if an error occurs when

recording in XAVC S format.

Memory card slot A

Note the direction of the notched
corner.

Memory card slot B

SLOT SEL button

Содержание HXR-NX200



























































































































Результаты поиска

Содержание HXR-NX200

Отзывы:

Похожие инструкции для HXR-NX200

Бренды по названию

Популярные бренды

Sony HXR-NX200, Руководство по эксплуатации

Результаты поиска

Содержание HXR-NX200

Отзывы:

Похожие инструкции для HXR-NX200

Бренды по названию

Популярные бренды