Sony HT-ST9, Руководство по эксплуатации

Страница: 26 / 187

26
US
[Off]: No signals are output when system in standby mode. This
setting saves power in the standby mode compared to the [On]
setting.

[Quick Start/Network Standby]
[On]: Shortens the startup time from standby mode. You can operate
the system quickly after turning it on.
[Off]: Off

[Auto Standby]
[On]: Turns on the [Auto Standby] function. When you do not
operate the system for about 20 minutes, the system enters standby
mode automatically.
[Off]: Off

[Auto Display]
[On]: Automatically displays information on the TV screen when
changing the audio signals, picture mode, etc.
[Off]: Displays information only when you press DISPLAY.

[Software Update Notification]
[On]: Sets the system to inform you of latest software version
information (page 22).
[Off]: Off

[Auto Update Settings]
[Auto Update]
[On]: Software update is automatically executed between 2 a.m. and
5 a.m. local time in the selected [Time Zone] while this system is not
in use. If you select [Off] in [Quick Start/Network Standby], software
update is performed after you turn off the system.
[Off]: Off
[Time Zone]
Select your country/region.

Software update may be performed even if you select [Off] in [Auto
Update] depending on the details of the updates.
 Software update is performed automatically within 11 days of a new
software release.

[Device Name]
You can change the name of this system according to your
preference so that it is more recognizable when using the [Bluetooth
Audio] or [Screen mirroring] function. The name is also used with
other networks, such as the home network. Follow on-screen
instructions and use the software keyboard to enter the name.

[System Information]
You can display the system’s software version information and the
MAC address.

[Software License Information]
You can display the Software License Information.

[Internet Settings]
Connect the system to the network beforehand.
[Wired Setup]: Select this when you connect to a broadband router
using a LAN cable.
[Wireless Setup(built-in)]: Select this when you use the built-in Wi-Fi
function of the system to connect to a wireless network.
Tip
For further details, visit the following website and check the FAQ:
http://www.sony.com/soundbarsupport

[Network Connection Status]
Displays the current network connection status.

[Network Connection Diagnostics]
You can run the network diagnostic to check if the network
connection has been made properly.
Notes
[Network Settings]