Sony HT-M2, Руководство по эксплуатации

Страница: 26 / 44

26 GB
Note
Character or marks may not be displayed for some
languages.
Recording using the
receiver
You can only record audio signals from an
audio/video equipment using the receiver.
Refer to the operating instructions supplied
with your recording equipment.
1
Press one of the input button to
select the playback equipment
that you want to record.
You can also use INPUT SELECTOR on
the receiver.
2
Prepare the playback
equipment for playing.
For example, insert the CD you want to
copy into the CD player.
3
Prepare the recording
equipment.
Insert a blank video tape, etc. into the
recording equipment (connected to
VIDEO OUT jacks).
4
Start recording on the
recording equipment, then start
the playback equipment.
Notes
• Sound adjustments do not affect the signal output
from the VIDEO OUT jacks.
• Some sources contain copyright protection to
prevent recording. In this case, you may not be able
to record from the source.
• Audio input signals via DIGITAL IN jacks cannot
be recorded.
• While the source is being recorded, the auto
standby function of the receiver may start up and
interrupt the recording. In this case, set the
“AUTO.STBY” to “STBY OFF” (page 35).
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
18).
Tip
The tuning scale for direct tuning is shown below.
* The AM tuning scale can be changed (page 27).
1)
RM-AAU135 only.
2)
RM-AAU136 only.
Tuner Operations
Area FM AM
Latin America and
Argentina 50 kHz 10 kHz*
South Africa 50 kHz 9 kHz
TUNING
+/–
ENTER
Numeric
buttons
D.TUNING
AMP
MENU
,
V / v / B / b
FM MODE
AM
2)
TUNER
1)
/
FM
2)