Getting Started
10
GB
Before You Use Your Amplifier
Before you use your amplifier for the first time or when
you want to clear the amplifier’s memory, do the
procedure below:
1
Turn off the amplifier.
2
Press
?
/
1
(power) for more than 4 seconds.
“INITIAL” appears in the display and the items
including the following are reset or cleared:
• All sound field parameters are reset to their
factory settings.
• The fan control setup is reset to FAN ON.
Note
If you are using a Sony DVD player together with this home
theater system, set your DVD player to the following
configuration:
If you are using a non Sony DVD player, refer to the
operating instructions supplied with the DVD player for
speaker setup.
?
/
1
(power)
Speakers
Front
Center
Rear
Subwoofer
Settings
SMALL
SMALL
SMALL
YES