Sony HT-IV300, Руководство по эксплуатации

Страница: 57 / 68

57
GB
A
d
di
tion
a
l I
n
fo
rm
a
tio
n
The system does not work normally.
t Disconnect the AC power cord (mains
lead) from the wall outlet (mains), then
reconnect after several minutes.
“PRTECT”, “PUSH” and “POWER”
appear alternately in the front panel
display.
t Press " / 1 to turn off the system, and
check the following items after
“STBY” disappears.
• Are the + and – speaker cords short-
circuited?
• Are you using only the supplied
speakers?
• Is anything blocking the ventilation
holes of the system?
• After checking the above items and
fixing any problems, turn on the
system. If the cause of the problem
cannot be found even after checking
all the above items, consult your
nearest Sony dealer.
“D. MODE” appears in the front panel
display.
t Contact your nearest Sony dealer or
local authorized Sony service facility.
“Exxxx” (x is a number) appears in
the front panel display.
t Contact your nearest Sony dealer or
local authorized Sony service facility
and give the error code.
appears without any messages on
the entire TV screen.
t Contact your nearest Sony dealer or
local authorized Sony service facility.
“NOT.USE” appears in the front panel
display when you press any of the
sound field buttons (page 22).
t The setting for the sound field buttons
cannot be changed when the [Sound
Effect] is set to other than [Sound Field
On]. Set [Sound Effect] in [Audio
Settings] to [Sound Field On].
There is no picture or the picture is
not output correctly.
t Check the output method on your
system (page 28).
t
Press
x
, DISPLAY,
b
,
V
in sequence
to reset the video output resolution to
the lowest resolution.
t For USBs, check the [USB 24p
Output] settings in [Screen Settings]
(page 51).
There is no picture when you make an
HDMI cable connection.
t
The main unit is connected to an input
device that is not HDCP (High-
bandwidth Digital Content Protection)
compliant (“HDMI” in the front panel
does not light up) (page 28).
The dark area of the picture is too
dark/the bright area is too bright or
unnatural.
t Set [Picture Quality Mode] to
[Standard] (default) (page 41).
An image is not displayed on the
entire TV screen.
t Check the setting of [TV Type] in
[Screen Settings] (page 51).
t
The aspect ratio on the media is fixed.
Messages
Picture