Sony HT-IV300, Руководство по эксплуатации

Страница: 48 / 68

48
GB
4
Press V / v to select [Speaker
Settings], then press .
The [Select speaker layout.] display
appears.
5
Press V / v to select setting
according to your speakers
placement, then press
.
• [Standard]: The surround speakers
are installed in the rear position.
• [All Front]: All speakers are installed
in the front position.
All settings are reset to default settings each
time you change the speaker layout setting.
6
Press V / v to select the item, then
press .
7
Press or B / V / v / b to adjust the
parameter.
8
Press to confirm the settings.
Check the following settings.
x [Centre Speaker]
[On]: The center speaker is connected.
[Off]: The center speaker is not connected.
x [Distance]
Be sure to set the parameters of the distance
from the listening position to the speakers.
You can set the parameters from 0.0 to
7.0 meters.
[Front Left/Right] 3.0 m: Set the front
speaker distance.
[Centre] 3.0 m: Set the center speaker
distance. This setting is only available
when [Centre Speaker] is set to [On].
[Surround Left/Right] 3.0 m: Set the
surround speaker distance.
[Subwoofer] 3.0 m: Set the subwoofer
distance.
x [Level]
You can adjust the sound level of the
speakers. You can set the parameters from
–6.0 dB to +6.0 dB. Be sure to set [Test
Tone] to [On] for easy adjustment.
[Front Left/Right] 0.0 dB: Set the front
speaker level.
[Centre] 0.0 dB: Set the center speaker
level. This setting is only available when
[Centre Speaker] is set to [On].
[Surround Left/Right] 0.0 dB: Set the
surround speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer
level.
x [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting level.
When you select one of the [Speaker
Settings] items, the test tone is emitted
from each speaker in sequence.
Adjust the sound level as follows.
1
Set [Test Tone] to [On].
2
Press V / v to select [Level], then
press .
3
Press V / v to select the speaker type
you want, then press .
4
Press B / b to select the left or right
speaker, then press V / v to adjust the
level.
5
Press .
6
Repeat Steps 3 to 5.
7
Press RETURN.
The system returns to the previous
display.
Note