Sony HT-IV300, Руководство по эксплуатации

Страница: 39 / 68

39
GB
P
lay
b
ack
By holding an NFC-compatible remote
device near to the N-Mark on the main unit,
the main unit and remote device proceed to
complete pairing and the BLUETOOTH
connection automatically.
1
Download and install the “NFC
Easy Connect” application.
“NFC Easy Connect” is a free
application for Android remote
devices that can be obtained on Google
Play. Search for the application using
the keyword “NFC Easy Connect” on
the site, or access the download site
directly by reading the two-
dimensional code below.
Note that “NFC Easy Connect” is free
but data communication fees when
downloading are charged separately.
Two-dimensional code * for
direct access
* Use a two-dimensional code reader
application.
2
Start the “NFC Easy Connect”
application on the remote
device.
Make sure that the application screen
is displayed.
3
Hold the remote device near to
the N-Mark on the main unit
(page 38) until the remote device
vibrates.
Vibration cue is provided when the
remote device is recognized by the
main unit. Follow the on-screen
instructions displayed on the remote
device, and complete the procedure for
BLUETOOTH connection.
When the BLUETOOTH connection is
established, the blue LED indicator on
the front panel lights up.
For some remote devices, this function may be
available without downloading “NFC Easy
Connect”. In this case, the operation and
specifications of the remote device may differ
from the description in this manual.
If pairing and the BLUETOOTH connection fail,
do the following.
– Relaunch “NFC Easy Connect” and move the
remote device slowly over the N-Mark.
– Remove the case from the remote device if
using a commercially available remote device
case.
To listen to music
Start playback of an audio source on the
remote device. For details on playback
operations, refer to the operating
instructions of your remote device.
If the volume level is low, adjust the volume of
the remote device first. If the volume level is still
too low, adjust the volume level on the main unit.
To stop playback
The playback will be stopped when you
perform any of the following items.
– Hold the remote device near to the
N-Mark on the main unit again.
Connecting to a remote
device by One-touch
listening function (NFC)
Compatible remote devices
Smartphones with a built-in NFC function
(OS: Android 2.3.3 – 4.x.x, excluding
Android 3.x)
Note
Tip
Tip