13
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2662263323DDW880_GB\2662263323\GB03CON_HT-
DDW880-CEL.fm
masterpage: Right
HT-DDW880
2-662-263-
32
(3)
Gettin
g
Sta
rted
a)
The MASTER VOL +, TV VOL +, TV CH + and
H
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
• The AUX and 12 buttons on the remote are not
available for receiver operation.
Name
Function
Numeric
buttons
Press ALT (
G
) and then press
the numeric buttons to
– preset/tune to preset
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the TV, VCR, satellite tuner,
Blu-ray disc recorder, hard
disc recorder, or PSX.
>10/11
Press ALT (
G
) and then press
>10/11 to select track
numbers over 10 of the CD
player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
wj
Input buttons
Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in “Programming the
remote” on page 66.
* The AUX button is not available
for receiver operation.
Button
Assigned Sony
component
VIDEO1
VCR (VTR mode 3)
VIDEO2
VCR (VTR mode 1)
VIDEO3
VCR (VTR mode 2)
DVD
DVD player
MD/TAPE
MD deck
SA-CD/CD Super Audio CD/CD
player
TUNER
Built-in tuner
AUX*
Not assigned
Name
Function
wk
TV
?
/
1
Press to turn the TV on or off.
wl
RM SET UP
Press to set up the remote.
GB01COV_HT-DDW880-CEL.book Page 13 Friday, July 21, 2006 11:37 AM
