Sony HMC-NX5MD, Руководство по обслуживанию

Страница: 21 / 86

21
[LED All Lit, Key Check Mode]
Procedure:
1. Press the
? / 1
button to turn the power ON.
2. Press three buttons of
G
(MD),
A
(DISC 1), and
[DISC 5]
simultaneously.
3. LEDs are all turned on.
Press the
G
(CD) button, and the key check mode is activated.
4. To release from this mode, press three buttons in the same
manner as step 2, or remove the power cord.
[CD Delivery Mode]
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the
? / 1
button to turn the power ON.
2. Press the
G
(MD) and
[DISC 1]
buttons simultaneously.
3. A message “LOCK” is displayed on the liquid crystal display
of the STR-NX5MD, and the CD delivery mode is set.
[CD/MD Test Mode]
(In case of connected to the STR-NX5MD)
• If connected to the STR-NX5MD, the mode also acts as the
STR-NX5MD amplifer test mode.
Procedure:
1. Press the
? / 1
button to turn the power ON.
2. Press three buttons of
[ENTER/YES]
+
[DEMO]
and
[BAND]
of
the STR-NX5MD simultaneously.
3. On liquid crystal display of the STR-NX5MD, the disc calendar
blinks, then the function which was set before the test mode
became active is displayed.
[CD/MD Test Mode]
(In case of connected to the power feed jig)
Procedure:
1. Turn on the Power switch on the power feed jig.
2. Press three buttons of
G (MD), A (DISC 1), and s (CD)
simultaneously.
3. Also, the other functions are enabled by pressing two buttons
simultaneously.
A combination of respective functions and buttons is as follows.
function button
CD AMS – AMS –
AMS + AMS +
FR m
FF M
MD AMS – AMS –
AMS + AMS +
FR
m
FF M
SECTION 4
TEST MODE
[COLD RESET]
Procedure:
1. Press the
? / 1
button to turn the power ON.
2. Press CLEAR (MD) and
s
(CD) buttons simultaneously.