Sony HKSR-101, Руководство по эксплуатации

Страница: 65 / 128

Chapt
er
5
Re
c
o
rdin
g
and
Pl
a
y
bac
k
65
5-2 Recording Preparations and Operations
5-2 Recording
Preparations and
Operations
Before recording, make the following preparations.
About connections for recording, see page 26.
a) This selection is possible only when the frame frequency is 23.98PsF.
5-2-1 Selecting the Video Input To
Record (When Optional HKSR-
101 Is Installed)
When the optional HKSR-101 is installed in this unit,
select the input from the CAMERA connector (optical-
fiber connector) or the input from the HD SDI IN A/B
connectors.
1
Press the menu selection button “VIDEO”.
The VIDEO Setup menu appears.
2
Rotate the SELECT/ENTER dial to select “VIDEO I/
O”, and press the dial.
A settings window appears.
3
Rotate the SELECT/ENTER dial to select one of the
following, and press the dial.
CAM(Optical): Use the input signal from the
CAMERA connector.
SDI Input: Use the input signal from the HD SDI IN
A/B connectors.
5-2-2 Selecting Signals to Output to
the HD Monitor
Before recording video, first check it on the monitor.
When the frame frequency is 23.98PsF, in the VIDEO
Setup menu, select whether or not to perform pulldown
conversion for the output to the MONITOR OUT HD SDI
connector.
1
Press the menu selection button “VIDEO.”
The VIDEO Setup menu appears.
2
Rotate the SELECT/ENTER dial to select PD(MON),
then press the dial.
A setting window appears.
3
Rotate the SELECT/ENTER dial to select one of the
following, then press the dial.
AUTO: Pulldown conversion is performed if the
frame frequency is 23.98 Hz. Otherwise pulldown
conversion is not performed.
THRU: Pulldown conversion is not performed.
Operation Menu item or
control Reference
Select the recording
source input to the
SRPC-1 (when the
optional HKSR-101 is
installed). VIDEO I/O in the
VIDEO Setup menu Page 65
Select whether or not
to perform pull-down
conversion for the
output to the HD
monitor.
a)
PD(MON) in the
VIDEO Setup menu Page 65
Select the audio
signals to record. INPUT SEL in the
AUDIO Setup menu Page 66
Make settings for
audio signals to
monitor. PHONE SEL in the
AUDIO Setup menu Page 66
Set the audio level
meter display range. METER TYPE in the
AUDIO Setup menu Page 67
Set the recording
audio level. REC LEVEL in the
AUDIO Setup menu Page 67
Adjust the level of
audio signals output
to the EARPHONES
jack. Rotate the LEVEL
knob of the
EARPHONES jack. Page 17
Page 20
Cancel record inhibit
if the system is set to
record inhibit mode. REC INHI in the
SYSTEM Setup menu Page 70
Select the type of
time data to display. TIMER SEL in the TC
Setup menu Page 68
Make settings for the
timecode generator
depending on
timecode and user bit
data to record. RUN MODE, TCG
MODE, REGENE
SOURCE in the TC
Setup menu Page 68
V I D E O S e t u p
PD(MON)
DC
MON SEL(x2)
VIDEO I/O
LUT(MON)
LEVEL CLIP AUTO
SRW-1 TCR
00:00:00:00 C A S S O U T