Sony HKSR-101, Руководство по эксплуатации

Страница: 17 / 128

C
h
ap
te
r 2
N
a
m
e
s
a
n
d
F
u
nc
ti
on
s
of
P
a
rt
s
17
2-1 SRW-1
j
SR Motion
When the SYSTEM >FORMAT >SELECT FPS menu
item is set to “ON” or “VTR” and the signal format is
being displayed, pressing both the FUNC and HOME
buttons together displays the FPS or FRM on the second
line and the memory level on the third line.
See Chapter 7 “SR Motion (With HKSR-102 Installed)”
(page 78) for more information about the SR Motion
function.
2-1-4 Connector Panel
a
TC IN (timecode input) connector (BNC type)
Connect to the timecode output connector of an external
device such as a timecode generator or VTR. Use this
connector when locking the internal timecode generator to
external timecode.
b
CTRL (control) PANEL connector
Connect the control panel. You can remove the short cable
connected when the SRW-1 is shipped from the factory
and replace it with the supplied extension cable.
For details, see 3-1-2 “Using the Control Panel Extension
Cable” (page 24).
c
EARPHONES jack (stereo minijack) and LEVEL
knob
Use this connector to attach earphones or stereo
headphones equipped with a stereo miniplug, for use in
monitoring audio during recording and playback. Adjust
the audio level with the LEVEL knob.
A warning tone is output to the earphones/headphones
when a warning is lit on the control panel display.
d
TC OUT (timecode output) connector (BNC type)
Connect to the timecode input connector of an external
device such as a timecode reader or VTR.
1 TC IN connector
2 CTRL PANEL connector
3
EARPHONES jack and
LEVEL knob
4 TC OUT connector
5
POWER ON/OFF switch
6
AUDIO INPUT CH-1 and CH-2 connectors and input selection switches