Sony HKSR-101, Руководство по эксплуатации

Страница: 67 / 128

Chapt
er
5
Re
c
o
rdin
g
and
Pl
a
y
bac
k
67
5-2 Recording Preparations and Operations
Average: Simple average
2
Press the SELECT/ENTER dial.
5-2-4 Setting Recording Audio
Levels
To check recording audio levels, use the audio level meters
in the control panel display. The display switches
automatically between recording audio levels during
recording and playback audio levels during playback.
To set the display range of the audio level
meters
The METER TYPE item allows you to set the display
range of the audio level meters.
1
Rotate the SELECT/ENTER dial to select the scale to
display.
Full Peak: Display 0 dBFS as the peak value.
Full Ref: Display the reference level (+4 dBu) as 0 dB.
Fine: Display a scale with steps of 0.25 dB centered
around
−
20 dB.
2
Press the SELECT/ENTER dial.
To set recording audio levels
The REC LEVEL setting window allows you to set
recording audio levels for the individual channels.
Note
Recording levels cannot be set during playback.
1
Rotate the SELECT/ENTER dial to select a channel (1
to 12).
2
Press the SELECT/ENTER dial.
The current recording level of the selected channel is
shown as a hexadecimal number. UNI is shown for
channels whose recording levels have not been
changed.
3
Rotate the SELECT/ENTER dial to select UNI/VAL,
and press the dial.
If you do not need to change the recording level, set the
recording level of the channel selected in steps
1
and
2
to UNI and proceed to step
5
. If you do need to change
the recording level, set the recording level of the
channel selected in steps
1
and
2
to VAR and proceed
to step
4
.
4
Rotate the ADJUST knob to set the recording level.
Rotate clockwise to raise the level and rotate
counterclockwise to lower it.
To reset the setting
Rotate the SELECT/ENTER dial to move the cursor to
RESET, and press the dial.
5
Press the SELECT/ENTER dial.
6
Repeat steps
1
and
2
to select other channels and steps
3
and
4
to set the recording levels of those channels.
7
When you are finished, rotate the SELECT/ENTER
dial to select END, and press the dial.
5-2-5 Making Timecode and User
Bits Settings
Use the TC Setup menu to make timecode and user bits
settings.
A U D I O S e t u p
INPUT SEL
PHONE SEL
MIX MODE
REC LEVEL
PB LEVEL
OUTPUT PHASE
METER TYPE
PEAK HOLD
RMS
PEAK
ON
BEEP(PHONE)
SRW-1 TCR 00:00:00:00 C A S S O U T
METER TYPE
PEAK PEAK
REF REF
FINE FINE
R e c L e v e l
SRW-1 TCR
00:00:00:00 C A S S O U T
1 2 3 4 5 6 7 8 9 10 11 12
END RESET UNI/VAR
CH1 CH5 CH9 4040 4040 4000
CH2 CH6 CH10 4040 4040 4000
CH3 CH7 CH11 UNI 4040 4000
CH4 CH8 CH12 UNI 4040 4000
Cursor
Recording
levels
Channel
numbers
Recording
level settings