Sony HKC-7081, Руководство по установке и обслуживанию

Страница: 38 / 92

3-14 (E)
HKC-7081
3-1-4. File Menu
The File menu stores and clears the adjustment values or setting values stored in the Reference, OHB,
Operator and Lens files.
To activate the File menu, first display the TOP menu.
Page Ver. Item Settings Contents
Reference File Store File Press MENU SEL switch Stores the reference values used for automatic setup
to execute adjustment and the standard settings of the switches as the
reference files
m
.
When executing the Store File on the Reference File page,
settings of items which have been set just before the file
store through the Paint, Maintenance and SYS Config
menus are registered as the reference values
. If changed values is to be returned to the reference values
stored in the reference files, recall the standard file using an
MSU/RCP or the setup menu
Clear File Press MENU SEL switch Clears the adjustment values stored as the reference files
to execute (Temporarily clears the current reference files)
n
If the unit is powered off without execution of the Store File
after clearing the file, the original setting is restored
10sec Clear On,
[Off]
Turns on and off the function to clear the reference value by
continuing to push up MENU SELECT switch to ENTER more
than ten seconds
(With 10 sec Clear set at On, move the cursor to a menu item
to be cleared, and press the MENU SEL switch more than ten
seconds while “?” is brinking. The reference item can be
cleared)
n
The setting is returned to Off when the unit is powered off
When the unit is powered off without execution of the Store
File after the file is cleared, the original setting is restored
OHB File Store File Press MENU SEL switch Stores specific data for a CCD unit to be used as the OHB
to execute files The standard values are stored at the factor (Stores the
white offset value for ND filter, OHB matrix data and so on)
Operator File Store Preset File Press MENU SEL switch Stores the user’s preset values of the operator file
to execute
Clear Preset File Press MENU SEL switch Returns the preset values of the operator file to their factory
to execute settings
Lens File File 1 to
[16]
Selects a lens file appropriate for a mounted lens from 16
kinds of the lens files
F Stop F1.0 to F3.4 (
[F1.5]
) Sets a stop number of a lens
Store File Press MENU SEL switch Stores the adjustment value on each item (except the location
to execute of the center marker) as the lens file
Clear Current File Press MENU SEL switch Returns the selected lens file to the factory setting
to execute
Center H POS _ 20 to 20 (
[0]
) Shifts horizontally the location of the center marker on the
screen
20 (right)
↔
_ 20 (left)
Center V POS _ 20 to 20 (
[0]
) Shifts vertically the location of the center marker on the screen
20 (down)
↔
_ 20 (up)
Center POS Store Press MENU SEL switch Stores the location of the center marker at present in the
to execute selected lens file number
3-1. Setup Menu
3-1-4. File Menu