Sony HKC-7081, Руководство по установке и обслуживанию

Страница: 22 / 92

2-4 (E)
HKC-7081
2-4. Black Shading Adjustment
Equipment: Analog waveform monitor
Test Point: TEST OUT connector
Preparations
. Connect the waveform monitor to the TEST OUT
connector of the unit.
.
Y/RGB switch (at the top of the side panel)
→
RGB
. Close the lens iris.
Adjustment Procedures
1. R/G/B switch (at the top of the side panel)
→
R
2.
MSU menu operation:
.
MAINTENANCE button
→
ON (lit)
. Touch panel operation
[Adjusting]
→
[White|Shading]
→
[R]
.
Adjustment Items: H Saw, H Para, V Saw, V Para
3. R/G/B switch (at the top of the side panel)
→
G
Adjust for G-ch in the same manner.
4. R/G/B switch (at the top of the side panel)
→
B
Adjust for B-ch in the same manner.
OHB File Store
MSU menu operation:
.
FILE button
→
ON (lit)
. Touch panel operation
[OHB|File]
→
[OHB|Store]
→
[Store]
2-4. Black Shading Adjustment
2-5. ND Offset Adjustment
A
2-5. ND Offset Adjustment
Equipment: Analog waveform monitor
Object: Full white pattern
Preparations
. Connect the waveform monitor the TEST OUT connec-
tor.
.
Shoot the fully occupied white area of the white pattern
on the underscanned monitor frame.
. Setting for MSU-700
AUTO button (Iris control block)
→
ON (lit)
.
Iris of the lens: A = 600
±
20 mV
. Set the setup menu as follows.
MENU: Maintenance
PAGE: ND Offset
ITEM: ND OFST Store
→
Enable
Adjustment Procedures
1. FILTER CTRL button/MSU-700
→
ON (lit)
2. Select the ND 1 filter.
ND 1 button/MSU-700
→
ON (lit)
3. Adjust the white balance.
WHITE button/MSU-700
→
ON (lit)
4. After the white balance adjustment is complete, switch
the filter to ND2, ND3 and ND4 and adjust the white
balance for each.
OHB File Store
1. MSU menu operation:
.
FILE button
→
ON (lit)
.
Touch panel operation
[OHB|File] → [OHB|Store] → [Store]
2. When the store operation is complete, the message
“OHB File Stored” is displayed.