Sony HDVF-EL70, Руководство по эксплуатации

Страница: 45 / 54

Using the Menu
45
01 FUNCTION
IBAC
OFF/
[5]
/15/30 For setting the time (minutes) after which the IBAC
(Intelligent Brightness Ambient Control) function is
activated.
For the IBAC function, see “On IBAC (Intelligent Brightness
Ambient Control)” on page 29.
PEAKING PLUS
SW [MODE1] /MODE2 For selecting the operation mode upon pressing the
ASSIGN. switch that is assigned the PEAKING PLUS
function.
MODE1: Toggles PEAKING MODE STD h PLUS.
MODE2: Toggles in the sequence of STD
t
COLOR
t
AREA
t
BOTH
t
STD.
02 TALLY/IND UP TALLY OFF/
[ON]
For controlling the up-tally lamp.
ON: Enables the up-tally lamp.
OFF: Disables the up-tally lamp. (Does not light up even
when the camera receives red tally signals.)
UP TALLY DIM 1 to
[5]
to 10 For setting the brightness of the up-tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
TALLY/IND OFF/
[ON]
/
UPPER/LOWER
For controlling the indicators (including the tally indicators).
OFF: Activates the BATT indicator and the STATUS
indicator only.
ON: Activates all indicators including the tally indicators.
UPPER: Activates the indicators (including the upper tally
indicators) except the lower tally indicators.
LOWER: Activates the indicators (including the lower
tally indicators) except the upper tally indicators.
TALLY/IND DIM 1 to [5] to 10 For setting the brightness of the indicators (including the
tally indicators).
Raising the value increases the brightness; lowering the
value decreases the brightness.
03
PEAKING FREQUENCY L/
[M]
/MH/H Set the center frequency of edge enhancement signals.
RANGE 1/ [2] /3/4 Set the variable range of the level of edge enhancement
signals.
COLOR
PEAKING
[OFF]
/ON The edge enhancement signals are displayed converted to
the color.
OFF: Enhance the edge in white.
ON: Enhance the edge in the color specified in “COLOR.”
COLOR [BLUE] /RED/
YELLOW/
GREEN/ORIG
When “ON” is set in “COLOR PEAKING,” select the color of
the edge enhance signals.
BLUE: Enhance the edge in blue.
RED: Enhance the edge in red.
YELLOW: Enhance the edge in yellow.
GREEN: Enhance the edge in green.
ORIG: Displays in monochrome and enhances the edge
in the original color.
CHROMA – 99 to
[0]
to 99 Set the chroma level. (This does not affect to the camera’s
outputting level.)
The smaller the number, the less the amount of chroma.
The setting is linked to the “CHROMA” setting of the
FUNCTION menu.
Page Menu Item Settings
(default in
[ ]
)
Function