background image

81

Menu Contents

  

Chap

te

r 7
  

Men

u

s

HD PROCESS CONTROL 

[> HD Process]

ADJ RANGE [>> Adj range]:

 

Select the adjustment 
range for video gain and 
chrominance gain.

*

–3 to +3(db) [>>> –3/+3]:

 –3 dB to +3 dB

WIDE [>>> wide]:

 –

∞ 

to +3 dB

VIDEO GAIN [>> V gain]:

 

Control the video output 
level.

000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: 

*

200H

CHROMA GAIN [>> C gain]:

 

Control the chrominance 
output level.

000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: 

*

200H

CHROMA PHASE [>> C 

phase]:

 Control the 

chrominance phase.

00 [>>> 000] to FF [>>> FF]
Factory default setting: 

*

80H

SETUP LEVEL [>> Setup 

lev]:

 Control the setup 

level.

000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting: 

*

200H

SYNC PHASE [> Sync 

Phase]:

 Adjust the sync 

phase.

SYNC PHASE [>> Sync 

phs]:

 Control the 

SYNC+SC phase.

000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting:

 

*

Adjusted value at factory or 200H

SUB CARRIER [>> SC 

phase]:

 Control the 

subcarrier phase.

000 [>>> 000] to 3FF [>>> 3FF]
Factory default setting:

 

*

Adjusted value at factory or 200H

INPUT BLANK [> Input blnk]

Note 

Displayed only when the 
system frequency is set to 50i.

LINE 335 [>> Line 335]:

 

Select whether to blank 
line 335, or to output it as 
part of the video signal.

*

BLANK [>>> blank]: 

Blank.

THROUGH [>>> through]:

 Output as a video signal.

AUDIO CONTROL [Audio]: Settings related to audio 
control 

Description of settings

REC MODE [> REC mode]:

 Select the audio recording mode. 

*

2 CHANNEL (48kHz) [>> 2 ch]: 

2-channel, 48-kHz mode

4 CHANNEL (32kHz) [>> 4 ch]: 

4-channel, 32-kHz mode

INPUT ARRANGE [> Input arng]: 

Make settings for input 

audio mixing.

Notes 

• When, in 4-channel mode, analog audio is selected for all 

four channels (channels 1/2 and 3/4), the same analog 
audio signals are recorded on channels 1 and 3 and on 
channels 2 and 4, respectively. That is, the analog signal 
recorded on channel 1 is also recorded on channel 3 and 
the analog signal recorded on channel 2 is also recorded on 
channel 4.
You can adjust the audio level on each of the four channels 
separately using the REC/PB LEVEL control knobs with the 
VARIABLE switch set to REC.

• For an i.LINK input selection, this setting is invalid.

Set the channels on which to record the input audio signals as 
follows.
(1) Use the 

Mm<

/

A

 

,

/

B

 

 buttons to move the cursor and 

the SET (YES) button to toggle the setting on and off.

(2) To save the settings, press the MENU button to return to the 

previous screen, then press the SET (YES) button.

Example settings:

1

Input audio channel 1 (“CH1”) is recorded on audio channel 

1 (“CH1”) on tape.

2

Input audio channels 2 and 4 (“CH2” and “CH4”) are 

recorded mixed on audio channel 2 (“CH2”) on tape.

3

Input audio channel 4 (“CH4”) is recorded on audio channel 

3 (“CH3”) on tape.

4

Input audio channel 3 (“CH3”) is recorded on audio channel 

4 (“CH4”) on tape.

VIDEO CONTROL [Video]: Settings related to video 
control 

Description of settings

      A U D I O   I N P U T   S O U R C E
                A R R A N G E

        i n 1   i n 2   i n 3   i n 4
      - - - - - - - - - - - - - - - - -

c h 1 : * o n
c h 2 :         o n             o n
c h 3 :                         o n                
c h 4                   o n

          O N / O F F   :     S E T   K E Y
        T O   M E N U   :     M E N U   K E Y

1

2

3

4

Содержание HDV HVR-1500
















































































































Отзывы: