21
Menu List
The following conventions are used in the menu tables.
Settings ON, OFF, 0, etc.:
Factory default settings shown underlined.
ENTER to execute:
Execute by pushing the control knob or setting the CANCEL/ENTER lever to the ENTER position.
CONFIGURATION menu
Use to set basic settings of the unit (excludes image quality
settings).
Legend
Page name
Page No.
Item
Set value
Meaning
<SYSTEM>
C01
SYSTEM FORMAT
System format settings
RESOLUTION
3840×2160
Resolution setting (display only)
FREQUENCY
1.001
, 1.000
Base frequency setting
FRAME RATE
59.94
, 50, 29.97, 25, 24, 23.98
Frame rate setting
DISPLAY REFERRED
Display Referred conversion mode on/off
setting
Display Referred conversion: Conversion from
SDR to HDR that maintains the image visual
appearance on a display.
When set to ON, the input is restricted to SDR
and the output to HDR, and the image quality
adjustments settings, excluding the SDR-to-
HDR conversion gain, are fixed.
CH.A
OFF
, ON
CH.B
OFF
, ON
<GENLOCK>
C02
REFERENCE
REF IN, CH.A IN, INTERNAL
Reference sync signal in use (display only)
REF IN: Using sync signal input on reference
sync signal input connector
CH.A IN: Using video signal input on channel A
INTERNAL: Using internally-generated sync
signal
REF IN
Settings and status of reference sync signal
input on reference sync signal input connector
(display only)
STATUS
OK, NO SIGNAL, NG(FORMAT
UNMATCHED), NG
OK: Operating normally
NO SIGNAL: No signal is input
NG(FORMAT UNMATCHED): Format of the
input signal does not match the format of the
unit
NG: An invalid signal is input due to other
reasons
FORMAT
UNKNOWN, NTSC, PAL, 1080/
59.94i, 1080/50i, 1080/24PsF
Format of reference sync signal input on
reference sync signal input connector (display
only)
CH.A IN
Settings and status of reference sync signal
input on channel A (display only)
STATUS
OK, NO SIGNAL, NG(FORMAT
UNMATCHED), NG
OK: Operating normally
NO SIGNAL: No signal is input
NG(FORMAT UNMATCHED): Format of the
input signal does not match the format of the
unit
NG: An invalid signal is input due to other
reasons
FORMAT
UNKNOWN, NTSC, PAL, 1080/
59.94i, 1080/50i, 1080/24PsF
Format of reference sync signal extracted from
video signal input on channel A (display only)
