Sony HDCU-F950, Руководство по установке и обслуживанию

Страница: 49 / 62

2-15 (E)
HDCU-F950 IMM
Setting the Frame Frequency Conversion
When the operation frame frequency of the camera is set to
24F (24PsF), set the frame frequency conversion of the
return signal.
Setup switch : S606 on the DTX-1A board
(Factory setting : All OFF)
S606-1, -2 : RET 1
S606-3, -4 : RET 2
S606-5, -6 : RET 3
S606-7, -8 : PROMPTER (RET 4) (not supported)
S603-1, -3, S603-2, -4, Type of the frame
-5, -7 -6, -8 conversion
ON ON THROUGH :
Frame frequency is not
converted.
OFF ON A (24PsF conversion) :
When the camera is 24PsF,
the forced-reverse conversion
is performed. (Conversion to
reconstruct 24PsF)
ON OFF B (48i conversion) :
When the camera is 24PsF,
the forced-reverse conversion
is perfomed. (Conversion to
48i format by simple skipping)
OFF OFF AUTO :
Depends on the setting of
S100-1 on the FC-94 board.
Setup switch : S610 on the DTX-1A board
(Factory setting : 0)
You can set phase of the frame frequency conversion
manually. For details, refer to Section 1-6-5. “Setting of
Switches on Boards
_ DTX-1A Board”.