1-28 (E)
SRW-5800
4. Reading the settings from the system bank
n
No data can be read from the system bank in the standby
mode or while a tape is loaded in the unit.
Eject the tape and confirm that the standby mode is set to
off before reading data.
(1) Press the
[F8]
(DIRECTION) key with the SYSTEM
BANK menu, and choose direction.
The left cursor bar blinks.
(2) Position the lighting cursor bar at a bank number (1 to
8) for reading with the
[(]
/
[)]
keys.
(3) Press the
[F9]
(COPY) key.
A confirmation message appears.
To cancel reading
Press the
[CLR]
(CLEAR) key while the confirmation
message is displayed.
(4) Press the
[F9]
(COPY) key while pressing the
[SFT]
(SHIFT) key.
Upon completion of writing the setting to the current
system settings, the system is reset with a beep and the
unit restarts.
After the unit restarts, the title of the read bank number
appears at the left item
[C]
.
n
If the system settings are updated after reading, the
title displayed at
[C]
remains unchanged.
(5) Press the
[F10]
(EXIT) key several times to return to
the HOME menu.
1-11-6. Storing/Reading System Settings in/
from Memory Stick
The system settings saved in the system bank of the unit
can be stored in a Memory Stick with a title.
The system settings saved in a Memory Stick can also be
loaded to the system bank of the unit.
Data saving in and reading from a Memory Stick are
available with the SYSTEM CARD BANK menu.
For titling the system bank, refer to Section 1-11-7.
n
The system settings saved in the system bank are stored in
a Memory Stick as a file different from that in the VTR
bank (menu file).
1. Inserting Memory Stick.
(1) Open the lower control panel. (Refer to Section 1-12.)
(2) Insert a Memory Stick to store or read the system
settings into the Memory Stick slot.
n
If another Memory Stick is already inserted, press the
eject button at the right of the Memory Stick slot to
eject it.
