1-26 (E)
SRW-5800
(7) Press the
[F8]
(LTC OUT) key several times to set the
LTC output phase (LINE or FC).
LINE: Outputs in the same phase as the main line.
FC:
Outputs in the same phase as FC output.
3. Storing the settings
(1) Press the
[F1]
(NVRAM CTL) key.
(2) Select “SAVE ALL DATA” using the
[(]
/
[)]
keys,
and press the
[F10]
(EXIT) key.
.
The changed data is written in the NV-RAM, and
the menu returns to the PHASE SET menu.
.
Or select either of the following items, and then
press the
[F10]
(EXIT) key.
NO OPERATION:
Changed data is not saved.
ALL DATA PREVIOUS: To return the data to the
previous data.
RESET ALL DATA:
To reset the NV-RAM to
the factory setting.
(3) Press the
[F10]
(EXIT) key several times to return to
the HOME menu.
DIAG
F1
F2
F3
F4
ALT
F5
F6
F7
F9
F10
AUDIO
INPUT
LTC
OUT
EXIT
OTHERS CHECK
PHASE SETTING
HD SDI OUTPUT ADV.
: -90H
SD SDI OUTPUT ADV.
: -2H
AUDIO PB OUTPUT ADV. : -1FRAME
AUDIO INPUT DELAY
: +1FRAME
TC INPUT DELAY
: +1FRAME
AES/EBU &
MONITOR OUTPUT
: LINE
LTC OUTPUT
: LINE
AU PB
OUT
NVRAM
CTL
HD SDI
OUT
SD SDI
OUT
TC
INPUT
AES/MO
OUT
F8
DIAG
F1
F2
F3
F4
ALT
F5
F6
F7
F8
F9
F10
EXIT
NVRAM CONTROL
NO OPERATION
SAVE ALL DATA
ALL DATA PREVIOUS
RESET ALL DATA
OTHERS CHECK
1-11-5. Storing and Reading System Settings
in/from System Bank
Up to eight current system settings made by the SYSTEM
menu, META DATA SETUP menu, and PHASE SET
menu can be saved in the system bank of the unit with
respective titles. The settings can also be read from the
system bank as current settings.
The SYSTEM BANK menu is available for storing and
reading system settings in/from the system bank.
The settings saved in the system bank can also be stored in
a Memory Stick with the SYSTEM CARD BANK menu,
and read from the Memory Stick.
For titling the system bank, refer to Section 1-11-7.
For storing/reading the data saved in the system bank in/
from a Memory Stick, refer to Section 1-11-8.
n
SYSTEM BANK and SYSTEM CARD BANK menus are
available to store/copy data, but are not available to update
system settings.
1. System settings
Perform system settings using the SYSTEM menu, META
DATA SETUP menu, and PHASE SET menu referring to
the following.
.
SYSTEM menu:
Section 1-11-1
.
META DATA SETUP menu: Section 1-11-3
.
PHASE SET menu:
Section 1-11-4
