4
Focus assist functions
The focus assist functions can be used when a monitor is
connected to the SDI 1 connector and the output setting is set
to VF.
For details, see “Setting the Focus Assist Functions”
(page 12).
VF detail
Supports focusing on various scenes using a function that
adds color to the VF detail signal displayed on a monitor, a
function that applies modulation to flicker the VF detail signal,
and a function that changes the level of the VF detail signal
according to the zoom position.
Focus assist indicator
Displays a focusing level indicator on a monitor as a guide to
the focus position. This allows the focus point to be
determined easily by observing the fluctuation of the indicator.
Focus position meter
Displays the lens focus control position as a meter on a
monitor, when a supported lens
1)
is attached.
This allows you to place a marker for any focus value which
acts as a guide for focus control.
1)
Lenses that support serial, lens command control.
Follow focus function
Enables focus control from the camera (focus demand), and
both the MSU-1000/1500 and RCP-1000/1500 series device,
when a supported lens
1)
is attached. This allows focusing with
main control from the camera, and additional fine control from
MSU-1000/1500 and RCP-1000/1500 series devices.
1)
Lenses that support serial, lens command control Ver. 1.04 or later.
Various monitor functions
Wide variety of monitor display options
You can display configuration settings, in addition to operation
messages, a zebra pattern, a safety-zone marker, and a
center marker on a monitor. Also, there are indicators along
the top and bottom of the monitor, such as a tally lamp, battery
warning indicator, and an indicator that warns you when one
or more settings are not within standard range.
Menu-based operation function
You can make selections and settings related to monitor
display items, safety zone marker, center marker, and screen
size marker, etc. quickly and easily while viewing the setup
menu.
PinP function
The return video signal or HD prompter picture can be
displayed on a monitor in picture-in-picture mode.
The PinP function cannot be used during standalone
operation.
Variety of input/output interfaces
In addition to 3G/HD-SDI output and HD-SDI input, the
HDC-P43 features a variety of input/output interfaces,
including the following.
Network TRUNK function
The network TRUNK function (LAN port) allows for data
transmission between the camera and CCU at speeds of up to
100 Mbps.
The network TRUNK transfer rate differs depending on the
video format. Jumbo frames are not supported.
HD prompter function
The HDC-P43 supports an HD prompter function where HD-
SDI equivalent digital data is sent from the HDCU4300 or
HDCU2000/2500 to the HDC-P43, separate from the return
video signal.
The HD prompter function can only be used when a single
format is selected and the network TRUNK function is set to
OFF.
Options
You can add new functions and compatibility with other video
formats by embedding the following options.
For details about installing options, please contact your Sony
dealer or a Sony sales representative.
For specifications or more detailed information on options,
refer to the manual of each option.
SZC-4001/4001M/4001W 4K upgrade software
Enables shooting of 4K images.
Note
Note
Note
