Chapter 4 Adjustments and Settings for Recording
Chapter 4
Adjustments and Settings for Recording
4-13(E)
4-5-2 Setting Marker Display
The MARKER page of the OPERATION menu is
used to turn ON or OFF the display of the center
marker, safety zone marker, 4:3 frame marker, 4:3
mask, and effective pixel area. It is also used to set
display areas and display positions.
To set up marker display
1
Set the VF DISP switch to MENU.
2
Rotate the MENU SEL control to display the
MARKER page, and push the MENU SEL control.
MARKER: Toggles all markers on or off
CENTER: Set to ON to display the center marker.
Selects the type of center marker (1 to 4).
SAFETY ZONE: Set to ON to display the safety
zone marker. Selects the safety zone area (80%,
90%, 92.5%, or 95%).
MKR MODE: Selects the 4:3, 16:9, or VISTA
marker mode
FRAME: Set to ON to display the 4:3 or VISTA
frame marker
MASK: Set to ON to display the 4:3 mask or
VISTA mask
MASK LEVEL: Selects the 4:3 mask or VISTA
mask level (0 to 100%)
EFFECT: Set to ON to display the effective pixel
area
3
Rotate the MENU SEL control to align the “
n
”
marker with the item to be changed, and push the
MENU SEL control.
The “
n
” marker will change into a “?” mark.
VF DISP switch
MENU SEL control
4
Rotate the MENU SEL control to change the
setting to the desired value, and push the MENU
SEL control.
The “?” mark will change back to the “
n
” marker
and the new setting will be saved.
5
To end menu operations, set the VF DISP switch to
ON.
4-5-3 Setting Gain Values for the
GAIN Switch Positions
You can set video amplifier gain values to be selected
by the three positions (L, M, and H) of the GAIN
switch. Use the GAIN SW page of the OPERATION
menu to make these settings.
To set gain values for the GAIN switch
positions
1
Set the VF DISP switch to MENU.
2
Rotate the MENU SEL control to display the
GAIN SW page, and push the MENU SEL control.
LOW: Sets the gain value selected when the
GAIN switch is set to L
MIDDLE: Sets the gain value selected when the
GAIN switch is set to M
HIGH: Sets the gain value selected when the
GAIN switch is set to H
3
Rotate the MENU SEL control to align the “
n
”
marker with the item to be changed, and push the
MENU SEL control.
The “
n
” marker will change into a “?” mark.
VF DISP switch
MENU SEL control
(Continued)
Содержание HDC-750A
