Sony HDC-750A, Руководство по эксплуатации

Страница: 74 / 114

3-1 Precautions
Chapter 3 Preparations
3-2(E)
Chapter 3 Preparations
3-2 Connections
3-2-1 Attaching a Camera Adaptor
Attaching an HDCA-750A HD Camera Adaptor
makes it possible to connect a VTR, Camera Control
1
Mount the camera adaptor on the rear of the
camera.
Hook the adaptor on the top part of the CA mount
of the camera, then press the lower parts of the
adaptor and camera together until you hear a click
telling you that the matching connectors have been
engaged with each other.
Make sure the camera adaptor stays firmly in place
even if you try to move it.
2
Tighten the camera’s CA screw.
To remove the camera adaptor
Turn the camera’s CA screw counterclockwise to
loosen it, and push the screw inwards to remove the
adaptor.
Tighten the CA screw.
Turn the CA screw counterclockwise
until loose, then push inwards.
Connecting a VTR to the camera adaptor
You can connect a VTR to the camera adaptor attached
to the camera, as shown in the figure below.
HDCA-750A HD Camera Adaptor
HDC-750A
HDCZ-25 (25 meter (82 ft))
HDCZ-10 (10 meter (33 ft))
26-pin Connection Cable
26-pin
Portable HD VTR
Unit, or an HDCD-50 HD Signal Distributor to this
camera.