Sony HDC-750A, Руководство по эксплуатации

Страница: 105 / 114

Chapter 4 Adjustments and Settings for Recording
Chapter 4 Adjustments and Settings for Recording
4-21(E)
Page Setting item Allowable settings Description
Low-Key SAT LK CLP LVL –99 to +99 Sets the low-key saturation which sets the chrominance level
for parts of the subject with low illumination levels
LK Saturation ON, OFF Turns low key saturation setup ON or OFF
Clear Push the MENU
SEL control to
execute Resets all Low-Key SAT page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)
Standard
Test 1, 2, OFF Selects test signal
1: Sawtooth wave test output
2: Three-step waveform test output
OFF: No test signal output
Clear Push the MENU
SEL control to
execute Resets all Matrix page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)
Shutter
Scene File
File Store
Clear all current paint adjustment values and switch settings,
and return to the reference file state
1
2
3
4
5
Used for storing and recalling scene files.
(files which contain painting data for certain scenes)
To store:
1. Align the “ n ” marker with FILE STORE, and push the
MENU SEL control. “FILE STORE” will blink.
2. Select the number (1 through 5) of the file to be stored.
(If there is already data stored under that number, it will be
swapped for the new data.)
To recall:
Align the “ n ” marker with the number of the file to be recalled,
and push the MENU SEL control.
• Each time the MENU SEL control is pushed, the current
settings and the scene file settings will be exchanged.
• When a scene file is active (has been recalled), an asterisk
(*) will be displayed next to the scene file number.
SHUTTER/ECS ON, OFF Shutter and ECS on/off setting
1/100, 1/125, 1/250,
1/500, 1/1000,
1/2000, ECS
Shutter speed selection
ECS FREQ 30.0 to 7000 Hz
Set ECS frequency for eliminating monitor flicker
S-EVS ON, OFF
On/off setting for super-EVS function, raising the vertical
image resolution
0 to 100%
Super-EVS setting