HCD-SLK10D/SLK20D
67
Pin No.
Pin Name
I/O
Description
59
STBY-LED
O
LED drive signal output terminal for ON/STANDBY indicator
“L”: red LED on (STANDBY), “H”: green LED on (ON)
60
P.CONT
O
Power on/off control signal output to the switching regulator “H”: power on
61
FAN-CONTROL
O
Fan motor drive signal output terminal “H”: motor on
62
VCC
-
Power supply terminal (+3.3V)
63
PROTECT FAN
I
Protect signal input from the fan motor
64
VSS
-
Ground terminal
65
NO USE
-
Not used
66
USB POWER
O
Power on/off control signal output terminal for USB section “H”: power on
67
MTK POWER
O
Power on/off control signal output terminal for DVD section “H”: power on
68
POWER-KEY
I
Power key input terminal
69
ST_CE
O
Chip enable signal output to the tuner (FM/AM)
70
ST_DOUT
O
Serial data output to the tuner (FM/AM)
71
ST_CLK
O
Serial data transfer clock signal output to the tuner (FM/AM)
72
ST_DIN
l
Serial data input from the tuner (FM/AM)
73
/SD
I
Shut down signal input from the digital power amplifi er “L”: shut down
74
ST_TUNED
I
Tuning detection signal input from the tuner (FM/AM) “L”: tuned
75
TP INT
I
Interrupt signal input from the TOUCH SENSOR board
76
TP RESET
O
Reset signal output to the TOUCH SENSOR board “L”: reset
77
DSP-DATA
I/O
Two-way data bus with the digital audio processor
78
DSP-CLK
O
Serial data transfer clock signal output to the digital audio processor
79
DSP-VAILD
I
Valid signal input from the digital audio processor
80
DSP-MUTE
O
Muting on/off control signal output to the digital audio processor “L”: muting on
81
DSP-RESET
O
Reset signal output to the digital audio processor “L”: reset
82
DVD 3.3V MONITOR
I
Power (DVD +3.3V) monitor terminal
83
NO USE
-
Not used
84, 85
AD-KEY-1,
AD-KEY-0
I
Top and front panel key input terminal (A/D input)
86
RDS-DATA
I
RDS serial data input from the tuner (FM/AM)
87
NO USE
-
Not used
88
Vbus+5V_SW
O
Power on/off control signal output terminal for USB section “H”: power on
89
USB_D+_D-_SW
O
USB signal selection signal output terminal
90
USB_D+_D-_OE
O
Output enable signal output to the USB select IC
91
NO USE
O
Not used
92
VACS
I
VACS signal input from the digital audio processor
93, 94
NO USE
-
Not used
95
DEST-IN
I
Destination setting terminal
96
AVSS
-
Ground terminal
97
MODEL
I
Model setting terminal
98
VREF
I
Reference voltage (+3.3V) input terminal
99
AVCC
-
Power supply terminal (+3.3V)
100
NO USE
(AD-SWITCH)
O
Power on/off control signal output terminal Not used
Содержание HCD-SLK10D
Страница 30: ...HCD SLK10D SLK20D 30 MEMO ...
