Sony HCD-SLK10D, Руководство по обслуживанию

Страница: 15 / 94

HCD-SLK10D/SLK20D
15
2-9. MD BLOCK
2-10. POWER BLOCK
– Rear bottom view –
Note 1: Please spread a sheet under a unit
not to injure front panel.
2
wire (flat type) (9 core)
(CN703)
ditches
ditches
ditches
1
3
MD block
Note 2: When you installing the cover (CDM)
block, match the position of three
ditches.
Note 3: When you install the wire (flat type), please
install them correctly.
There is a possibility that this machine damages
when not correctly installing it.
Insert is straight
to the interior.
connector
Insert is incline.
wire
(flat type) wire
(flat type)
connector
OK NG
Note 4: Do not insert the wire (flat type) in the same amount of
connector by mistake. Refer to “2-21. HOW TO BEND
WIRE (FLAT TYPE)” (page 24) and “5-1. FLAME
PRINTED WIRING BOARDS” (page 31) for details.
2
screw
(BVTP2.6)
3
clamp (L35)
3
clamp (L35)
2
screw
(BVTP2.6)
1
connector
(CN900)
4
power block
– Rear bottom view –
Note: Please spread a sheet under a unit
not to injure front panel.
MAIN board
‡ : ire V etti QJ
clamp (L35)
bottom side