Sony HCD-SLK10D, Руководство по обслуживанию

Страница: 21 / 94

HCD-SLK10D/SLK20D
21
2-17. TOUCH PANEL BOARD
– Front panel inner view –
holder (sensor) TOUCH PANEL board
tape tape
‡ : ire V ettin J
1
five screws
(BVTP2.6)
3
holder (sensor)
2
two claws
– Rear bottom view –
4
6
TOUCH PANEL board
TOUCH PANEL board
tape
terminal side
‡ :
ire
V
ettin
J
Note 1: Please spread a sheet under a unit
not to injure front panel.
5
wire (flat type) (11 core)
(CN801)
Note
2: When you insert the wire (flat type) (11 core)
in CN801 on TOUCH PANEL board, it is not
necessary to make a mistake in the terminal
side of the wire (flat type) (11 core).
Note 3: When you install the wire (flat type), please
install them correctly.
There is a possibility that this machine damages
when not correctly installing it.
Insert is straight
to the interior.
connector
Insert is incline.
wire
(flat type) wire
(flat type)
connector
OK NG
Note 4: Do not insert the wire (flat type) in the same amount of
connector by mistake. Refer to “2-21. HOW TO BEND
WIRE (FLAT TYPE)” (page 24) and “5-1. FLAME
PRINTED WIRING BOARDS” (page 31) for details.