![background image](http://html.mh-extra.com/html/sony/hcd-shake5/hcd-shake5_service-manual_420880005.webp)
HCD-SHAKE5/SHAKE6D
5
hexagon key
hexagon key
NOTE OF REPLACING THE IC305 (SHAKE5), IC306
(SHAKE6D) AND IC902 ON THE MOTHERBOARD
BOARD
IC305 (SHAKE5), IC306 (SHAKE6D) and IC902 on the
MOTHERBOARD board cannot exchange with single. When these
parts on the MOTHERBOARD board are damaged, exchange the
entire mounted board.
NOTE OF REPLACING THE IC100 ON THE MOTHER-
BOARD BOARD
Once IC100 on the MOTHERBOARD board is exchanged,
perform “MODEL & DEST WRITE MODE” (refer page 14)
before operating the set.
NOTE OF REPLACEMENT OF THE MS-476 BOARD
When the MS-476 board is defective, exchange the entire
LOADING ASSY (T).
RELEASING THE DISC TRAY LOCK
The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Releasing Procedure:
1. Press
[
\
/
1
] button to turn the power on.
2. Press the [CD] (SHAKE5) / [DVD/CD] (SHAKE6D) button to
select DVD/CD function.
3. While pressing the [
x
] button, press the [OPTIONS]
(SHAKE5) / [
X
] (SHAKE6D) button for more 5 seconds).
4. The message “UNLOCKED” is displayed and the disc tray is
unlocked.
Note:
When
“
LOCKED
”
is displayed, the slot lock is not released by
turning power on/off with the
[
\
/
1
]
button.
NOTE OF DISASSEMBLE THE CASE, OVERALL
To disassemble the CASE, OVERALL, hexagon key is required to
unscrew the SCREW, TAPPING (HEX).
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S801/A (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module or
RC-S801/A (WW) board are replaced, please execute the below
service mode.
Pairing this system with a
Bluetooth device
1. Press the [
\
/
1
] button to turn the power on.
2. Place the
Bluetooth
device within 1 meter (3 feet) from the
system.
3. Press BLUETOOTH on the unit to select
Bluetooth
function.
“BLUETOOTH” appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
“PAIRING”
fl ashes in the display panel.
5. Perform the pairing procedure on the
Bluetooth
device.
6. Select the model number of the unit on the display of the
Bluetooth
device.
For example, select “SONY : SHAKE-5 / SHAKE-6D”. If
passkey is required on the
Bluetooth
device, enter “0000”.
7. Perform
the
Bluetooth
connection on the
Bluetooth
device.
8. When pairing is completed and the
Bluetooth
connection is
established, the
Bluetooth
device name appears in the display
panel.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until “BLUETOOTH” appears in
the display panel.
Connecting with a smartphone by one touch (NFC)
Note:
The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
1. Press the [
\
/
1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the
Bluetooth
connection is
established, the
Bluetooth
device name appears in the display
panel.
Содержание HCD-SHAKE5
Страница 85: ...MEMO HCD SHAKE5 SHAKE6D 85 ...