![background image](http://html.mh-extra.com/html/sony/hcd-shake5/hcd-shake5_service-manual_420880086.webp)
HCD-SHAKE5/SHAKE6D
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2013.07
New
1.1
2013.11
Change P/N and description for Ref. no. 53 for E12 model in Page 64 and Page 84.
Change P/N and description for R1064, R1065, R1066, R1067, R1068, R1069, R1070, R1071, R1199,
R1205, R1207, R1208, R1224, R1226, R1227, R1228, R1290 and R1293 in MOTHERBOARD board.
Change P/N for FOOT, RUBBER in Page 66.
Change P/N for Ref. no. 103 in Page 65.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF
fi
le search function to
fi
nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note:
If you still see the original page, press the [Enter] key again.
Содержание HCD-SHAKE5
Страница 85: ...MEMO HCD SHAKE5 SHAKE6D 85 ...