Sony HCD-MD313, Руководство по обслуживанию

Страница: 49 / 75

– 74 –
6-12. IC PIN FUNCTION DESCRIPTION
•
BD (MD) BOARD IC101 CXA2523AR (RF AMPLIFIER)
Pin No. Pin Name I/O Function
1 I I I-V converted RF signal I input from the optical pick-up block detector
2 J I I-V converted RF signal J input from the optical pick-up block detector
3 VC O Middle point voltage (+1.65V) generation output terminal
4 to 9 A to F I Signal input from the optical pick-up detector
10 PD I Light amount monitor input terminal
11 APC O Laser amplifier output terminal to the automatic power control circuit
12 APCREF I Reference voltage input terminal for setting laser power
13 GND — Ground terminal
14 TEMPI I Connected to the temperature sensor
15 TEMPR O Output terminal for a temperature sensor reference voltage
16 SWDT I Writing serial data input from the CXD2652AR (IC121)
17 SCLK I Serial clock signal input from the CXD2652AR (IC121)
18 XLAT I Serial latch signal input from the CXD2652AR (IC121)
19 XSTBY I Standby signal input terminal “L”: standby (fixed at “H” in this set)
20 F0CNT I
Center frequency control voltage input terminal of internal circuit (BPF22, BPF3T, EQ) input from
the CXD2652AR (IC121)
21 VREF O Reference voltage output terminal Not used (open)
22 EQADJ I Center frequency setting terminal for the internal circuit (EQ)
23 3TADJ I Center frequency setting terminal for the internal circuit (BPF3T)
24 VCC — Power supply terminal (+3.3V)
25 WBLADJ I Center frequency setting terminal for the internal circuit (BPF22)
26 TE O Tracking error signal output to the CXD2652AR (IC121)
27 CSLED I Connected to the external capacitor for low-pass filter of the sled error signal
28 SE O Sled error signal output to the CXD2652AR (IC121)
29 ADFM O FM signal output of the ADIP
30 ADIN I Receives a ADIP FM signal in AC coupling
31 ADAGC I Connected to the external capacitor for ADIP AGC
32 ADFG O ADIP duplex signal (22.05 kHz ± 1 kHz) output to the CXD2652AR (IC121)
33 AUX O Auxiliary signal (I3 signal/temperature signal) output to the CXD2652AR (IC121)
34 FE O Focus error signal output to the CXD2652AR (IC121)
35 ABCD O Light amount signal (ABCD) output to the CXD2652AR (IC121)
36 BOTM O Light amount signal (RF/ABCD) bottom hold output to the CXD2652AR (IC121)
37 PEAK O Light amount signal (RF/ABCD) peak hold output to the CXD2652AR (IC121)
38 RF O Playback EFM RF signal output to the CXD2652AR (IC121)
39 RFAGC I Connected to the external capacitor for RF auto gain control circuit
40 AGCI I Receives a RF signal in AC coupling
41 COMPO O User comparator output terminal Not used (open)
42 COMPP I User comparator input terminal Not used (fixed at “L”)
43 ADDC I Connected to the external capacitor for cutting the low band of the ADIP amplifier
44 OPO O User operational amplifier output terminal Not used (open)
45 OPN I User operational amplifier inversion input terminal Not used (fixed at “L”)
46 RFO O RF signal output terminal
47 MORFI I Receives a MO RF signal in AC coupling
48 MORFO O MO RF signal output terminal
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com