4-7. OPERATING THE CONTINUOUS RECORDING
MODE
4-7-1.
Entering the Continuous Recording Mode
1. Set the MO disc in the unit. (Refer to note 3.)
2. Turn the VOLUME and display “CREC MODE”.
3. Press the
p
(CD) button to change the display to “CREC
MID”.
4. When access completes, the display changes to “CREC (
)”
and
REC
lights up.
Note: The numbers “ ” displayed shows you the recording position ad-
dress.
4-7-2.
Changing the Parts to be Recorded
1. When the
p
(CD) button is pressed during continuous record-
ing, the display changes as below. (
REC
indication turns off
during change-over of display.)
4-6. OPERATING THE CONTINUOUS PLAYBACK
MODE
4-6-1.
Entering the Continuous Playback Mode
1. Set the disc in the unit. (Whichever recordable discs or discs for
playback only are available.)
2. Turn the VOLUME and display “CPLAY MODE”.
3. Press the
p
(CD) button to change the display to “CPLAY
MID”.
4. When access completes, the display changes to
“C =
AD=
)”.
Note: The numbers “ ” displayed show you error rates and ADER.
4-6-2.
Changing the Parts to be Played-back
1. Press the
p
(CD) button during continuous playback to change
the display as below.
2. When access completes, the display changes to
“C1=
AD=
”.
Note: The numbers “ ” displayed show you error rates and ADER.
4-6-3.
Ending the Continuous Playback Mode
1. Press the
^
(CD) button. The display will change to “CPLAY
MODE”.
2. Press the
§
(MD) button and remove the disc.
Notes:
1. The playback start address for IN, MID, and OUT are as fol-
lows.
IN
: 40h cluster
MID : 300h cluster
OUT : 700h cluster
In case you want to display the address of the playback position
on the display, press the
§
(CD) button and display “CPLAY
(
)”.
2. The
^
(CD) button can be used to stop playing anytime.
2. When access completes, the display changes to “CREC (
)”
and
REC
lights up.
Note: The numbers “ ” displayed shows you the recording position ad-
dress.
4-7-3.
Ending the Continuous Recording Mode
1. Press the
^
(CD) button. The display will change to “CREC
MODE” and
REC
goes off.
2. Press the
§
(MD) button and remove the disc.
Notes:
1. The recording start address for IN, MID, and OUT are as fol-
lows.
IN
: 40h cluster
MID : 300h cluster
OUT : 700h cluster
2. The
^
(CD) button can be used to stop recording anytime.
3. During the test mode, the erasing-protection tab will not be de-
tected. Therefore be careful not to set the continuous recording
mode when a disc not to be erased is set in the unit.
4. Do not perform continuous recording for long periods of time
above 5 minutes.
5. During continuous recording, be careful not to apply vibration.
4-8. EEP MODE
This mode reads and writes the contents of the non-volatile
memory.
It is not used in servicing. If set accidentally, press the
^
(CD) button immediately to exit it.
CPLAY MID
CPLAY OUT
CPLAY IN
CREC MID
CREC OUT
CREC IN
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
