Sony HCD-M100 Скачать руководство пользователя страница 17

Страница: 17 / 82

3. The tape A runs in fast forward. After two minutes of fast

forward, or at the shut-off point, the tape is stopped and the
aging mode advances to the next step.
The message: TAPE A AG-3 appears.

4. The tape A is played back in the RVS mode. After two minutes

of the RVS playback, the aging mode advances to the next step.
The message: TAPE A AG-4 appears.

5. The tape A is rewound and stops at the shut-off. The aging

mode advances to the next step.
The message: TAPE A AG-5 appears.

6. The tape B is played back in the FWD mode. After two minutes

of the FWD playback, the aging mode advances to the next
step.
The message: TAPE B AG-2 appears.

7. The tape B runs in fast forward. After two minutes of fast

forward, or at the shut-off point, the tape is stopped and the
aging mode advances to the next step.
The message: TAPE B AG-3 appears.

8. The tape B is played back in the RVS mode. After two minutes

of the RVS playback, the aging mode advances to the next step.
The message: TAPE B AG-4 appears.

9. The tape B is rewound and stops at the shut-off. The aging

mode advances to the next step.
The message: TAPE B AG-5 appears.

[AM TUNER STEP 9 kHz/10 kHz Selection Mode]

Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.

Procedure:

1. Turn on the power and select TUNER using the FUNCTION

button.

2. Select AM with the TUNER/BAND button and turn off the

power.

3. Press the two buttons ENTER and

@/1

at the same time. The

main power is turned on and the other frequency step of the
previous mode is selected and displayed. “AM 9 k STEP” or
“AM 10 k STEP”

[CD SRAM Test Mode]

Procedure:

1. Turn on the power and select CD using the FUNCTION button.
2. Press the three buttons

, ENTER and DBFB at the same

time.

3. The message “SRAM OK” appears on the fluorescent indicator

tube.

[GC VACS ON/OFF Mode]

Procedure:

1. Press the two buttons DELETE and

@/1

at the same time.

2. The message “VACS ON” or “VACS OFF” appears on the

fluorescent indicator tube.

Содержание HCD-M100



















































































Результаты поиска

Содержание HCD-M100

Отзывы:

Похожие инструкции для HCD-M100

Бренды по названию

Популярные бренды

Sony HCD-M100, Руководство по обслуживанию

Результаты поиска

Содержание HCD-M100

Отзывы:

Похожие инструкции для HCD-M100

Бренды по названию

Популярные бренды