HCD-DH50R/DH70SWR
HCD-DH50R/DH70SWR
25
25
SECTION 4
ELECTRICAL CHECK
FM TUNE LEVEL CHECK
signal
generator
set
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
: 75 kHz
Modulation
: 1 kHz
ANT input
: 35 dBu (EMF)
Note:
Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and tune A, B and C signals.
4. Con
fi
rm “TUNED” is lit on the display for A, B and C signals.
When the selected station signal is received in good condition,
“TUNED” is displayed.
Содержание HCD-DH50R
Страница 9: ...HCD DH50R DH70SWR 9 ARRANGEMENT OF LEAD WIRE lead wire lead wire ...
Страница 87: ...MEMO HCD DH50R DH70SWR 87 ...