![background image](http://html.mh-extra.com/html/sony/hcd-cpx22-cd-deck-receiver-component/hcd-cpx22-cd-deck-receiver-component_service-manual_420604014.webp)
14
HCD-CPX22/NXM3
SECTION 4
TEST MODE
[Change-over of AM Tuner Step between 9 kHz and 10 kHz]
• A step of AM channels can be changed over between 9 kHz
and 10 kHz.
Procedure:
1. Press
?/1
button to turn the set ON.
2. Select the function “TUNER”, and press
[TUNER/BAND]
button to select the BAND “AM”.
3. Press
?/1
button to turn the set OFF.
4. Press
x
and
?/1
buttons simultaneously, and the display
of fluorescent indicator tube changes to “AM 9 kHz step” or
“AM 10 kHz step”, and thus the channel step is changed over.
[Cold Reset]
• The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customer.
Procedure:
1. Press three buttons
x
,
[DIMMER]
,and
?/1
simultaneously.
[Switching MD/VIDEO Functions]
Procedure:
1. Press the
?/1
button to turn the set ON.
2. Press the
?/1
button while holding the VIDEO (MD)
button depressed to toggle between “MD” and “VIDEO.” The
selected mode is displayed.
[Error code indication]
Procedure:
1. Press the
?/1
button to turn the set ON.
2. Select the “CD” function.
3. Press the
x
,
X
, and
[DISPLAY]
buttons simultaneously.
4. The error code is displayed.
5. Press the
[]
button to display the next error code.
Press the
[TUNING -]
button to display the previous error
code.
[Aging Mode]
This mode can be used for operation check CD section and Tape
deck section.
• If an error occurred:
The aging operation stops and is displayed status.
• If no error occurs:
The aging operation continues repeatedly
1. Aging mode in CD section
Procedure:
1. Press
?/1
button on the set ON
2. Select the function “CD”
3. Press three buttons
x
,
X
, and
[DISC 3]
simultaneously.
The “Aging in” display and aging mode is set.
4. Press
[DISC 1]
button, starts aging mode of all trays check.
5. Press
[DISC 2]
button ,starts measurement loading time.
6. To exit from the aging mode perform
[Cold Reset]
.
1) Error display
Disc error
Display
Error
E00D01022
Focus error (No disc)
E00D02022
Sub Q error (Focus is good)
E00D02023
TOC reading error
E00D02014
Access error (Unable within regular time)
Mechanism error
Display
Error
E00M__E_0
Error during opening tray
E00M__C_2
EX-CHANGE disc error
E00M__D_0
Error during closing tray
E00M__F_3
EX-OPEN error
E00M__D_5
EX-CLOSE error
E00M__C_2
Chuck-up error
E00M__C_3
Unchucking error
2. Aging mode in Tape Deck section
Procedure:
1. Load the tapes into the decks A and B respectively.
2. Press
?/1
button on the set ON
3. Select the function “TAPE A”
4. Press three buttons
x
,
X
, and
[TAPE A/B]
simultaneously, and aging mode is started.
5. To exit from the aging mode perform
[Cold Reset]
.
• In the aging mode ,the program is executed in the following
sequence.
Step
Operation
Display
1
Rewind the TAPE A
TAPE A AG-1
2
Rewind the TAPE B
TAPE B AG-1
3
Play the TAPE A (
t
) (2 minute)
TAPE A AG-2
4
F•F. (AMS) the TAPE A
TAPE A AG-3
5
Play the TAPE A (
T
) (2 minute)
TAPE A AG-4
6
Rewind the TAPE A
TAPE A AG-5
7
Play the TAPE B (
t
) (2 minute)
TAPE B AG-2
8
F•F.(AMS) the TAPE B
TAPE B AG-3
9
Play the TAPE B (
T
) (2 minute)
TAPE B AG-4
10
Rewind the TAPE B
TAPE B AG-5