Sony HBD-N590, Руководство по обслуживанию

Страница: 72 / 108

HBD-N590/N790W/N890W/N990W/N995W/T79
72
Pin No. Pin Name I/O Description
C7 FEGIO7 O Laser diode control signal output to the BD drive
C9 FEFG I Motor hole sensor signal input from the coil/motor driver
C10 FEGIO0 O Motor drive muting control signal output to the coil/motor driver
C11 FETRAYPWM O Serial data transfer clock signal output to the coil/motor driver
C12 FEFMO4 - Not used
C13 FEGAINSW2 - Not used
C14 TLO - Not used
C15 AVDD12_2 - Power supply terminal (+1.2V)
C16, C17
MPXOUT1,
MPXOUT2
- Not used
C18 INH I Sub beam (H) input from the BD drive
C19 ING I Sub beam (G) input from the BD drive
C20, C21 TRINB, TRINC - Not used
C22 VWDC20 - Not used
C24 ARC I Digital audio signal input from the HDMI ARC OUT connector
C25 COAXIAL - Not used
C26 SPDIF - Not used
C27 NS_XTALI I System clock signal input terminal (27 MHz)
C28 NS_XTALO O System clock signal output terminal (27 MHz)
D1 GPIO1 I Ready signal input from the system controller “H”: ready
D2 GPIO16 - Not used
D3 GPIO17 I Chip select signal input from the system controller
D4 GPIO18 - Not used
D6 FEGIO9 I Slot loading detection switch input terminal
D7 FEGIO4 O Slave selection signal output to the coil/motor driver
D8 FE_TRAYOUT_ I Disc tray in detection signal input from the BD drive
D9 FEGIO6 - Not used
D10 FEEJECT_ - Not used
D13 FEGAINSW3 - Not used
D14 FEOSCEN O Serial data transfer clock signal output to the BD drive
D15 FEGAINSW1 O Mode A selection signal output to the BD drive
D16 FE_TRAYIN_ I Disc tray out detection signal input from the BD drive
D17 V14 - Not used
D18 INF I Sub beam (F) input from the BD drive
D19 HAVC O Reference voltage output to the BD drive
D20 TRINA - Not used
D21 FPDOCD - Not used
D22 VDAC0 - Not used
D24 MCIN I Digital audio signal input from the A/D converter
D26 AVDD33_DAC - Power supply terminal (+3.3V)
D27 CH2_P O TMDS data (positive) output to the HDMI ARC OUT connector
D28 CH2_M O TMDS data (negative) output to the HDMI ARC OUT connector
E1 GPIO3 - Not used
E2 GPIO2 - Not used
E3 GPIO6 O UPG status signal output to the system controller
E4 GPIO0 - Not used
E6 AVDD33_USB_P0P1 - Power supply terminal (+3.3V)
E8, E10 FEGIO3, FEGIO10 - Not used
E12 AVSS12_SATA - Ground terminal
E13 FEGIO5 O Mode B selection signal output to the BD drive
E14 FECFREQ I/O Two-way data bus with the BD drive
E17 AUX1 I Monitoring signal input from the BD drive
E18 AVDD33_3 - Power supply terminal (+3.3V)
E19 FVREF - Not used
E21 FPDODVD I Laser power monitor signal input from the BD drive
E22 VWDC30 - Not used
E23 AVDD12_1 - Power supply terminal (+1.2V)
E24 SPDATA - Not used
E26 AVDD33_HDMI - Power supply terminal (+3.3V)
E27 CH1_P O TMDS data (positive) output to the HDMI ARC OUT connector