82
Chapter 5
Adjusting and Setting Through Menus
Cha
p
te
r
5
A
dju
s
ting
a
nd
Se
tt
ing
T
h
ro
ugh
Me
nu
s
Operating Menus
TC/UB SET HDV/DV IN TC
Selects whether to record internal time code or external time code while the unit records
signals input from the
HDV/DV jack.
B
INTERNAL :
Records the time code generated by the internal time code generator. (If
[TC MAKE] is set to [REGENERATE] and no time code is recorded on the
tape, the unit records time code from 00:00:00:00. If there is time code
already recorded on the tape, the unit records continuous time code from
this point.)
EXTERNAL :
Records the time code with video and audio signals input from the
HDV/
DV jack.
• Bars (– –:– –:– –:– –) are recorded as the time code if you start recording when this item is
set to [EXTERNAL], the INPUT SELECT switch on the front panel is set to HDV/DV, and no
signal is input via the
HDV/DV jack.
When any signals are input, the time code of the signals is recorded.
• If you set this item to [EXTERNAL] and the external time code input is discontinuous or
does not advance correctly, recording or displaying of the time code on the unit may not be
done correctly. If there is a discontinuous time code on your recorded tape, you may not be
able to edit or search correctly, depending on the device used to edit.
TC RUN
Selects the advancement mode (counting up).
B
REC RUN :
Time code value advances only while recording.
FREE RUN :
Time code value advances even when the unit is not recording. (Use this
setting to adjust the initial value of the time code to the present time.)
• If you set the advancement mode to [FREE RUN], the time code will be updated by the
internal clock when the power is off. Therefore, when you turn on the unit again, the time
code may be somewhat off.
• If the internal backup battery is exhausted, the time code of the [FREE RUN] setting is
initialized.
TC MAKE
Selects the time code when you start recording.
B
REGENERATE :
The time code value is set to continuous time code from the one already
recorded on the tape. If no time code is recorded on the tape, it starts
from 00:00:00:00.
PRESET :
The time code starts from the value set in [TC PRESET] in the [TC/UB
SET] menu.
TC FORMAT
Selects the recording mode of the time code when 60i format is used.
B
AUTO :
Automatically sets the mode in accordance with the mode already set on a
cassette tape. (If nothing is recorded on the tape, the non-drop frame mode
is set. If the unit cannot correctly read the frame mode on the tape, it will
use the frame mode that was set in the last position on the tape that the
unit can read correctly. If you remove the cassette, the mode of the last
position that the unit was able to read correctly is cleared and the non-drop
frame mode is set when recording is restarted from the same position. If
[TC MAKE] is set to [PRESET], the non-drop frame mode is set.)
DF :
Selects the drop frame mode.
NDF :
Selects the non-drop frame mode.
When [60i/50i SEL] is set to [50i], the unit operates as a 50i specification model. Therefore,
the time code is set to the non-drop frame mode. Even if 60i signals are input via an i.LINK
connection when [60i/50i SEL] is set to [50i], the time code generated by the unit is in the
non-drop frame mode regardless of the [TC FORMAT] setting. To set the time code to the
drop frame mode, set [60i/50i SEL] to [60i]. As a result, [TC FORMAT] setting will return to
the status before the [60i/50i SEL] menu was set to [50i].
JOG TC OUT
Sets the time code output from the TC OUT jack ON/OFF when the tape is played at a speed
other than normal.
B
OFF :
Does not output the time code.
ON :
Outputs the time code.
Icon/Menu
Submenu
Setting
Notes
Notes
Note
