Sony Handycam DCR-PC53E Скачать руководство пользователя | Manualshive

Страница: 77 / 115

background image

77

Troubleshooting

DCR-PC53E/PC55E 2-548-726-11(1)

Batteries/Power sources

The power abruptly turns off.

• When approximately 5 minutes have elapsed while you do not operate your camcorder, the

camcorder is automatically turned off (A.SHUT OFF). Change the setting of [A.SHUT OFF]
(p. 51), or turn on the power again (p. 12), or use the AC Adaptor.

• Charge the battery pack (p. 8).

The CHG (charge) lamp does not light while the battery pack is being charged.

• Slide the POWER switch up to OFF (CHG) (p. 8).
• Attach the battery pack to the camcorder correctly (p. 8).
• No power is supplied from the wall socket (p. 8).
• Insert your camcorder into the Handycam Station correctly (p. 8).
• The battery charge is completed (p. 8).

The CHG (charge) lamp ﬂashes while the battery pack is being charged.

• Attach the battery pack to the camcorder correctly. If the problem persists, disconnect the

AC Adaptor from the wall socket and contact your Sony dealer. The battery pack may be
damaged.

The power turns off frequently although the remaining battery time indicator

indicates that the battery pack has enough power to operate.

• A problem has occurred in the remaining battery time indicator, or the battery pack has not

been charged enough. Fully charge the battery again to correct the indication (p. 8).

The remaining battery time indicator does not indicate the correct time.

• The temperature of the environment is too high or too low, or the battery pack has not been

charged enough. This is not a malfunction.

• Fully charge the battery again. If the problem persists, replace the battery pack with a new

one. It may be damaged (p. 8, 100).

• The indicated time may not be correct depending on the environment of use. When you open

or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.

The battery pack is quickly discharged.

• The temperature of the environment is too high or low, or the battery pack has not been

charged enough. This is not a malfunction.

• Fully charge the battery again. If the problem persists, replace the battery pack with a new

one. It may be damaged (p. 8, 100).

A problem occurs when the camcorder is connected to the AC Adaptor.

• Turn off the power, and disconnect the AC Adaptor from the wall socket. Then, connect it

again.

Continued



«
...
75
76
77
78
79
...
»

Содержание Handycam DCR-PC53E




















































































































Отзывы:

Нет отзывов

Похожие инструкции для Handycam DCR-PC53E

Бренд: Sony Страницы: 52

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 76

Бренд: Samsung Страницы: 89

Бренд: Samsung Страницы: 91

Бренд: Samsung Страницы: 107

Digital Photo Printer DPP-EX7

Бренд: Sony Страницы: 296

Бренд: GRASS VALLEY Страницы: 12

Бренд: GRASS VALEY Страницы: 80

Бренд: Sony Страницы: 2

Бренд: Jazz Страницы: 19

Бренд: Manhattan Страницы: 2

Бренд: Oregon Scientific Страницы: 1

AG-AC160A Series

Бренд: Panasonic Страницы: 8

Бренд: Watec Страницы: 28

Бренд: Easypix Страницы: 38

Бренд: Easypix Страницы: 2

Бренд: Mahe Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды