![background image](http://html.mh-extra.com/html/sony/gtk-x1bt/gtk-x1bt_operating-instructions-manual_420561016.webp)
16
GB
Tip
If pairing and the
Bluetooth
connection fail, do
the following.
– Relaunch “NFC Easy Connect” and move the
smartphone slowly over the N-Mark.
– Remove the case from the smartphone if using
a commercially available smartphone case.
To play music from the smartphone
Start playing an audio source on the
smartphone. For details on playback, refer
to the operating instructions of your
smartphone.
To disconnect the smartphone
Touch the smartphone to the N-Mark on
the system again.
Listening to music
wirelessly on a
Bluetooth
device
You can listen to music from your
Bluetooth
device over a wireless
connection.
Check the information on the website
about compatible
Bluetooth
devices
Pairing is an operation where
Bluetooth
devices register with each other
beforehand. Once a pairing operation is
performed, it does not need to be
performed again. If your device is an
NFC-compatible smartphone, the manual
pairing procedure is not necessary.
1
Place the
Bluetooth
device
within 1 meter (3 feet) from the
system.
2
Press BLUETOOTH on the unit
to select
Bluetooth
function.
“BT AUDIO” appears in the display
panel.
Note
If the system is connected to a
Bluetooth
device, press BLUETOOTH to disconnect
the
Bluetooth
device.
3
Hold down BLUETOOTH on the
unit for 2 seconds or more.
“PAIRING” flashes in the display
panel.
4
Perform the pairing procedure
on the
Bluetooth
device.
For details, refer to the operating
instructions of your
Bluetooth
device.
5
Select “SONY:GTK-X1BT” in the
display of the
Bluetooth
device.
If passkey is required on the
Bluetooth
device, enter “0000”.
6
Perform the
Bluetooth
connection on the
Bluetooth
device.
When pairing is completed and the
Bluetooth
connection is established,
Bluetooth
device name appears in the
display panel.
Depending on the
Bluetooth
device,
connection may start automatically
after pairing is completed.
You can check the
Bluetooth
device
address by pressing DISPLAY
repeatedly.
Notes
• You can pair up to 9
Bluetooth
devices. If the
10th
Bluetooth
device is paired, the oldest
paired device will be deleted.
• “Passkey” may be called “Passcode”, “PIN
code”, “PIN number” or “Password”, etc.,
depending on the device.
• The pairing standby status of the system is
canceled after about 5 minutes. If pairing is
not successful, repeat from step 1.
Pairing this system with a
Bluetooth
device
Содержание GTK-X1BT
Страница 32: ... 2014 Sony Corporation Printed in China ...