Sony GRAND WEGA KDS-R60XBR2, Руководство по обслуживанию

Страница: 32 / 262

– 31 –-
KDS-R60XBR2/R70XBR2
RM-YD009 RM-YD009
3-3. H/V CENTER CONFIRMATION AND AD-
JUSTMENT
Please check the picture horizontal/vertical center after the re-
placement of the following parts .
• Optical block
• Top assembly
1, Check H/V center with 480i monoscope signal in “Full “
mode .
2, If the center is shifted , adjust it with the following service items .
3-3-1. Adjustment
Note: Be sure to adjust in PAL and NTSC modes.
1. Feed PAL monoscope signal.
2. DISPLAY t 5 t VOL (+) t TV POWER
3. Picture Position Adjustment
• Press JUMP button twice to display the panel service mode.
• Select ' 1 TG'.
• By pressing '1' key, select Sub item 35 POB_ENA.
• By pressing '6' key, change data to '0'.
PANEL SERVICE
1TG
• Select 28th or 29th with pushing
1
or
4
button and adjust
with 3 or 6 button.
28 V_CENT (Vertical position)
29 H_CENT (Horizontal postion)
4. Writing data MUTE +
0
5. Feed NTSC monoscope signal.
6. Picture Position Adjustment
(Same as the item 3.)
7. Writing data MUTE + 0
8. After adjustment, perform TEST RESET.
(Refer to Item 3-2.)
3-1-4. Adjusting Buttons and Indicator
Commander Function
Button Mode Description
[MUTING] + [ENTER] WRITE Writes data to NVM.
-
+ [ENTER] READ Reads data from NVM.
8
+
[ENTER]
RESET Set the shipping condition.
FUNCTION OF KEYS ON COMMANDER
•
1
: Changes adjustment item. (item No. moves up)
•
4
: Changes adjustment item. (item No. moves down)
•
2
: Changes adjustment category.
(category moves up)
•
5
: Changes adjustment category.
(category moves down)
•
3
: Changes data value. (up)
•
6
: Changes data value. (down)
3-2. TEST RESET
The user settings can be reset to the factory default condition as
follows.
1. Service Adjustment mode. (Refer to item 3-1-1.)
It puts it into the state that "TVM Service Menu" is displayed.
(If it is after the adjustment etc., it returns it to the picture of
TVM with the JUMP key.)
2. 8 --> MUTING --> 0
The picture is muted, Test Reset is excuted, and all LED lights.
3. After turning off power, the AC plug is pulled out once, and
insert it again.
4. When turning on power, the picture of the language choice is
displayed.
PANEL 1TG 28 V_CENT (for V center)
29 H_CENT (for H center)
V_CENT
H_CENT
BD/DVD
DISPLAY
POWER
MUTING
VOL +
JUMP ENTER
RM-YD009
Adjustment item
up
Adjustment item
down
Adjustment category
up
Read data from
NVM
Adjustment category
down
Data up
Data down
Initialize data
(Not stored)
User control goes
to the standerd state
(Shipping Conditions)