NAS-SC500PK.GB.4-114-863-
11
(1)
GB
You can listen to or record playback sound from
an external component (such as a cassette deck)
connected to the AUDIO IN jack on the top or
rear of the unit.
Use an audio connecting cord (optional) to
connect the AUDIO IN jack on the unit to the
audio out jack on the external component.
Make sure the audio connecting cord is firmly
inserted into both jacks. If not, noise may be
generated in the sound output.
Note
The input level is set low for the AUDIO IN jacks on the
rear, and high for the AUDIO IN jack on the top. If the
volume of the connected component is too high, connect
it to the rear jacks. If the sound is too low, connect it to
the top jack.
Connecting an external component
(AUDIO IN)
Connecting to the AUDIO IN jacks on
the rear
To the AUDIO IN jack
Red
White
Audio connecting cord
(optional) with phono
plugs*
1
on each end
Audio out jacks
on the optional
component
External component
(cassette deck, etc.)
*
1
Make sure the white plug is connected to the white
jack and the red plug to the red jack.
Содержание Giga Juke NAS-SC500PK
