10
Customizing Your Monitor
Introducing the On-screen
Display System
Most adjustments are made using the MENU OSD.
MENU OSD
Press the MENU button to display the MENU OSD.
This MENU OSD contains links to the other OSDs described
below.
1
COLOR
Displays the COLOR OSD for adjusting the color
temperature.
2
CENTER
Displays the CENTER OSD for adjusting the centering
of the picture.
3
SCREEN
Displays the SCREEN OSD for adjusting the vertical
and horizontal convergence, etc.
4
ZOOM
Displays the ZOOM OSD for enlarging and reducing
the picture.
5
OPTION
Displays the OPTION OSD for adjusting the OSD
position and degaussing the screen, etc.
6
SIZE
Displays the SIZE OSD for adjusting the picture size.
7
LANG
Displays the LANGUAGE OSD for selecting the
language.
8
GEOM
Displays the GEOMETRY OSD for adjusting the picture
rotation and pincushion, etc.
9
EXIT
Closes the MENU OSD.
Navigating the MENU on-screen display
Select a link using the
¨
.
/
>
and
>
?
/
/
buttons in the
MENU OSD.
1
Press the MENU button.
The MENU OSD appears.
2
Press the
¨
.
/
>
and
>
?
/
/
buttons to select a link.
The selected link turns yellow.
3
Press the MENU button.
The selected OSD appears.
If no buttons are pressed, the MENU OSD automatically
disappears after about 10 seconds.
To close the MENU OSD, select “EXIT” and press the
MENU button.
Adjusting the on-screen display settings
Select an item using the
¨
.
/
>
buttons and adjust or select
the setting of that item using the
>
?
/
/
buttons.
To select an item, press the
¨
.
or
>
button.
The
”
mark goes to the selected item and the item turns
yellow.
To adjust or set an item, press the
>
?
or
/
button.
When adjusting an item, the bar length and the figure
increase or decrease.
When setting an item, the
p
mark turns green.
MENU
MENU
EXIT
CENTER
SIZE
GEOM
COLOR
LANG
ZOOM
SCREEN
OPTION
OK
MENU
MENU
MENU
11
Getting Started
Customizing Your Monitor
F
EN
ES
C
Using the CENTER On-screen
Display
The CENTER settings allow you to adjust the centering of
the picture.
Once the setting is adjusted, it will be stored in memory for
the current input signal.
1
Press the MENU button.
The MENU OSD appears.
2
Press the
¨
.
/
>
and
>
?
/
/
buttons to select “
CENTER,” and press the MENU button again.
The CENTER OSD appears.
3
For horizontal adjustment
Press the
>
?
/
/
buttons.
/
. . . to move the picture right
?
. . . to move the picture left
For vertical adjustment
Press the
¨
.
/
>
buttons.
>
. . . to move the picture up
.
. . . to move the picture down
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The horizontal and vertical centerings are both reset to the
factory settings.
Using the SIZE On-screen Display
The SIZE settings allow you to adjust the size of the picture.
Once the setting is adjusted, it will be stored in memory for
the current input signal.
1
Press the MENU button.
The MENU OSD appears.
2
Press the
¨
.
/
>
and
>
?
/
/
buttons to select “
SIZE,” and press the MENU button again.
The SIZE OSD appears.
3
For horizontal adjustment
Press the
>
?
/
/
buttons.
/
. . . to increase picture size
?
. . . to decrease picture size
For vertical adjustment
Press the
¨
.
/
>
buttons.
>
. . . to increase picture size
.
. . . to decrease picture size
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on.
The horizontal and vertical sizes are both reset to the factory
settings.
MENU
MENU
SIZE
26
73
CENTER
26
73
1-2
