To share your mobile connection by One-touch tethering
1
Make sure that both devices have the NFC function turned on, and that both
screens are active.
2
From your
Home screen
, tap .
3
Find and tap
Settings
>
More
>
Tethering & portable hotspot
.
4
Tap the
Portable hotspot
slider to enable the function.
5
Tap
One-touch portable hotspot
. Hold the devices together so that the NFC
detection areas of each device touch, then tap
CONNECT
.
This function only works with devices that also support NFC Wi-Fi tethering.
To share your mobile data connection with another Bluetooth® device
1
Make sure that your device and the other Bluetooth® device are paired with
each other and that mobile data traffic is activated on your device.
2
Your device
: From your
Home screen
, tap .
3
Find and tap
Settings
>
More
>
Tethering & portable hotspot
and then tap
the
Bluetooth tethering
slider to enable the function.
4
Bluetooth® device
: Set up the device so that it obtains its network
connection using Bluetooth®. If the device is a computer, refer to the
relevant instructions to complete the setup. If the device runs on the
Android™ operating system, tap the settings icon beside the name of the
device that it is paired with under
Settings
>
Bluetooth
>
Paired devices
,
then mark the
Internet access
checkbox.
5
Your device
: Wait for to appear in the status bar. Once it appears, the
setup is complete.
6
Tap the
Bluetooth tethering
slider again to disable the function.
The
Bluetooth tethering
function is turned off every time you turn off your device or turn
off the Bluetooth® function.
To use your device as a portable Wi-Fi hotspot
1
From your
Home screen
, tap .
2
Find and tap
Settings
>
More
>
Tethering & portable hotspot
.
3
Tap
Portable hotspot settings
>
Configure hotspot
.
4
Enter the
Network name (SSID)
information.
5
To select a security type, tap the
Security
field. If required, enter a password.
6
Tap
SAVE
.
7
Tap , then tap the
Portable hotspot
slider to enable the function.
8
If prompted, tap
OK
to confirm. appears in the status bar once the
portable Wi-Fi hotspot is active.
To allow a WPS-supported device to use your mobile data connection
1
Make sure that your device is functioning as a portable hotspot.
2
From your
Home screen
, tap .
3
Find and tap
Settings
>
More
>
Tethering & portable hotspot
>
Portable
hotspot settings
.
4
Under
Configure hotspot
, make sure that your portable hotspot is secured
by a password.
5
Enable
Discoverable
, if it was disabled.
6
Tap
WPS Push Button
, then follow the relevant instructions. Alternatively,
tap >
WPS PIN Entry
, then enter the PIN that appears on the WPS-
supported device.
To rename or secure your Mobile Hotspot
1
From the
Home screen
, tap .
2
Find and tap
Settings
>
More
>
Tethering & portable hotspot
.
3
Tap
Portable hotspot settings
>
Configure hotspot
.
4
Enter the
Network name (SSID)
information.
5
To select a security type, tap the
Security
field.
6
If required, enter a password.
7
Tap
SAVE
.
61
This is an internet version of this publication. © Print only for private use.