— 22 —
KV-32HS500/32HV600/34DRC500/34XBR800/36HS500/
36XBR800/38DRC500/40XBR800/42DRC800
SECTION 3: SAFETY RELATED ADJUSTMENTS
3-1. PREPARATION BEFORE
CONFIRMATION
Standard ............................................................................. 135.3 ± 1 VAC
Check Condition:
A
C
input
voltage:
120 (± 2) VAC
Note
:
If using a stabilized power supply, make sure that the distortion
factor is 3% or less.
S
etting
Mode:
........................................................................... Full mode
S
ignal
Input:
...........................................................Cross-hatch of NTSC
Initial
S
etting:
...................................................Standard Reset condition
C
on
fi
rm
Point:
.......................... Across CN5509 PIN 9 for B+ of D Board
3-1.1 HOLD-DOWN OPERATION
CONFIRMATION
1. Using an external DC power supply, apply 5.3 ± 0.5 Vdc between
Pin 2 of CN507 (jig connector) and ground (Pin 8); confi rm set goes to
hold-down (main power relay click).
2. Remove the external DC power supply.
3-2. B+ MAX CONFIRMATION
Standard ............................................................................. 135.3 ± 1 VAC
Check Condition:
A
C
input
voltage:
120 (± 2) VAC
Note
:
If using a stabilized power supply, make sure that the distortion
factor is 3% or less.
S
etting
Mode:
........................................................................... Full mode
S
ignal
Input:
...........................................................Cross-hatch of NTSC
Initial
S
etting:
...................................................Standard Reset condition
C
on
fi
rm
Point:
.......................... Across CN5509 PIN 9 for B+ of D Board
Содержание FD Trinitron WEGA KV-36HS500
