18
MANUAL PROGRAMME PRESET
This option allows you to:
a)
Preset broadcast channels or the VCR channel one by one to the programme order of your choice.
To do this:
1
Once you have entered the “Set Up”menu as explained on page 16 and after selecting the "Manual
Programme Preset" option, press
OK
. Next with
Programme
option highlighted press
OK
.
Press
v
or
V
to select which programme number you want to preset the channel on (for VCR, select
programme number “0”). Then press
B
.
2
The following option is only available depending on the country you have selected in the “Country”
menu.
After selecting the
System
option, press
OK
. Then press
v
or
V
to select the TV Broadcast system (
B/G
for western European countries, DK for eastern European countries,
L
for France or
I
for United Kingdom).
Then press
B
.
3
After selecting the
Channel Number
option, press
OK
. Next press
v
or
V
to select the channel tuning ("
C
"
for terrestrial channels or "
S
" for cable channels). Then press the number buttons to enter directly the channel
number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
b
and
v
or
V
to search for it. When you have tuned in to the desired channel, press
OK
twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this:
Once you have entered the “Set Up”menu as explained on page 16 and after selecting the "Manual Programme
Preset" option, press
OK
. Next with the
Programme
option, highlighted press the
PROG +/-
button to select the
programme number of the channel you wish to name. When the programme you want to name appears on the
screen, select the
Label
option and press
OK
. Then, with the first element highlighted, press
v
,
V
,
B
or
b
to
select the letter, then press
OK
. When you have finished, press
v
,
V
,
B
or
b
to select the word “
End
” on the
screen and finally press
OK
to remove the menu from the screen.
• To correct the letter, select "
%
" on the screen to go back and press
OK
.
• For a blank, select " " on the screen and press
OK
.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,
however, you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu
as explained on page 16 and after selecting the "Manual Programme" option, press
OK
. Then select the
AFT
option and press
b
. Next press
v
or
V
to adjust the fine tuning between -15 and +15. Finally press
OK
twice
to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this:
Once you have entered the "Set Up" menu as explained on page 16 and after selecting the "Manual Programme
Preset" option, press
OK
. Next with the
Programme
option highlighted, press the
PROG +/-
button to select
the programme number you want to skip. When the programme you want to skip appears on the screen, select
the
Skip
option and press
b
. Next press
v
or
V
to select
On
. Finally press
OK
twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
e)
View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart
3/
3 directly or through a VCR.
This option is only available depending on the country you have selected in the “Country” menu.
To do this:
Once you have entered the "Set Up" menu as explained on page 16 and after selecting the "Manual Programme
Preset" option, press
OK
. Next select the
Decoder
option and press
b
. Next press
v
or
V
to select
On
. Finally
press
OK
twice to confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
S
TV Functions
01GBKV29FQ86B.fm Page 18 Monday, February 16, 2004 10:18 AM
