manualshive.com logo in svg

Sony DXC-327BF, Руководство по эксплуатации

Поделиться
Скачать
Sony DXC-327BF Скачать руководство пользователя страница 71

71

Using the Optional Carrying Case

Storing the Camera

Align the camera with the base of the case, and slide
the camera in forward.
Checking that the pin at the rear engages correclty,
push forward until it locks into place.

Notes

• Position the eyecup of the viewfinder downward,

slide the viewfinder fully rearward and to the left,
then fix before storing.

• When an optional microphone (ECM-670/672, etc.)

is attached, loosen the microphone fixing screws,
move the microphone to the lowest position, and fix
before storing.

Example of fully-stored carrying case

Note

The camera cannot be stored in the LC-421 carrying
case with the CAC-4 when the PVV-1/1P/1A/1AP/3/
3P is attached.

Align the camera with the base of the carry case.

Lever

Base

VCT-U14 Tripod Adaptor

Betacam SP cassettes, camera cables, etc.

NP-1B Battery Packs
(maximum two)-fasten straps

DXC-327B-series Color Video Camera
This can be stored with the following system component fitted.
• CA-537/537P/327/327P/325A/325AP/325B Camera Adaptor
or EVV-9000/9000P or PVV-1/1P/1A/1AP/3/3P Videocassette
Recorder
• DXF-601/601CE Viewfinder
• ECM-670/ECM-672 Microphone
• Zoom Lens (VCL-714BX , etc.)
• CAC-12 Microphone Holder
• CAC-4 Chest Pad

LC-421 Carrying Case

Fasten straps

Содержание DXC-327BF

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды